D
Daniel81
Hi all,
Please don't slate me, saying i should know this already, im asking for advice not a dig.
i have not long started up my new business and have i have just taken on my first big job. im fully qualified and registered with Benchmark. So heres the job, a complete renovation of an old property, on my side and electrical wise its a complete rewire and many additions, outside lighting, LED Bath panel lighting, kitchen Pelmet LED lighting, Testing & Inspecting etc etc. heres the questions,
1- what certificates should i use, due to it being a rewire plus additions.
2- He has first fixed the downstairs ( house is set out as, bedrooms, bathroom downstairs, living room, kitchen upstairs) i would like to dead test the circuits, however without testing each individual piece of cable due to him terminating each cable in the patresses etc, he has not added accessories just terminated the cable. what's your recommendations. ive heard of bad results from using connector blocks and i dont think is good practice, i could be wrong, im asking.
3- The LED in bath panel- the bath panel will be marble, i do not fancy due to my inexperience drilling into a ÂŁ300 piece of marble.
4- He has the power distribution company coming out to move the position of the mains incoming. as currently its down stairs connected to the distribution board, and he wants it moved upstairs, could i not just insert a cut off switch and take the tails to the upstairs, inside regulations, to the the distribution board. saving him a couple of grand. or just let him crack on and waste his money.
If your thinking ive bitten off more than i can chew, maybe your right, but i need to learn and i work is slow so i cant turn it down.
All help is mega appreciated.
cheers guys/girls
Dan
Please don't slate me, saying i should know this already, im asking for advice not a dig.
i have not long started up my new business and have i have just taken on my first big job. im fully qualified and registered with Benchmark. So heres the job, a complete renovation of an old property, on my side and electrical wise its a complete rewire and many additions, outside lighting, LED Bath panel lighting, kitchen Pelmet LED lighting, Testing & Inspecting etc etc. heres the questions,
1- what certificates should i use, due to it being a rewire plus additions.
2- He has first fixed the downstairs ( house is set out as, bedrooms, bathroom downstairs, living room, kitchen upstairs) i would like to dead test the circuits, however without testing each individual piece of cable due to him terminating each cable in the patresses etc, he has not added accessories just terminated the cable. what's your recommendations. ive heard of bad results from using connector blocks and i dont think is good practice, i could be wrong, im asking.
3- The LED in bath panel- the bath panel will be marble, i do not fancy due to my inexperience drilling into a ÂŁ300 piece of marble.
4- He has the power distribution company coming out to move the position of the mains incoming. as currently its down stairs connected to the distribution board, and he wants it moved upstairs, could i not just insert a cut off switch and take the tails to the upstairs, inside regulations, to the the distribution board. saving him a couple of grand. or just let him crack on and waste his money.
If your thinking ive bitten off more than i can chew, maybe your right, but i need to learn and i work is slow so i cant turn it down.
All help is mega appreciated.
cheers guys/girls
Dan