Wiring instructions for buzzer

[ricardo27]

Hi
Could someone please help with a wiring diagram or instructions to wire up a buzzer to a 10A 1 gang press bell switch.
It has L1 and L2 at the bottom and COM and N Loop at the top.
The buzzer only has 2 wires.
Thanks.

 

[brianmoooore]

Just use COM and L1 at the switch. N Loop is just a 'parking' terminal, or one for joining two wires together, and not connected to anything inside the switch.
If the buzzer sounds all the time except when the switch is pressed, move the wire in L1 to L2 instead.