work in progrees in Micro Brewery. | Page 3 | on ElectriciansForums

Discuss work in progrees in Micro Brewery. in the UK Electrical Forum area at ElectriciansForums.net

telectrix

-
Mentor
Nearly Esteemed
Arms
Joined
Sep 5, 2010
Messages
73,534
Reaction score
71,830
Location
cheshire/staffordshire
s title. soon be up and brewing.

[ElectriciansForums.net] work in progrees in Micro Brewery.


[ElectriciansForums.net] work in progrees in Micro Brewery.


[ElectriciansForums.net] work in progrees in Micro Brewery.
 
It takes a lot of balls to put pictures of your work up for public scrutiny. Constructive critique is one thing none of us is whiter than white on 100% of all jobs not than we would like to be. I think you lot are being a bit hard on Tel if he is using the correct gland out of the packet the shroud may need a bit of heat to make it a bit pliable, do you really think he is going to leave the rubbish on the floor and the cover off the other isolator.
 
It's a shame Tel let the customer tell him in part how to job a bit of tray or similar to take the cable on over the conduits.
The cost of a job or the budget available should not detract from the requirement to comply with relevant Regulations.
 
It takes a lot of balls to put pictures of your work up for public scrutiny. Constructive critique is one thing none of us is whiter than white on 100% of all jobs not than we would like to be. I think you lot are being a bit hard on Tel if he is using the correct gland out of the packet the shroud may need a bit of heat to make it a bit pliable, do you really think he is going to leave the rubbish on the floor and the cover off the other isolator.

Tel's a Scouser, I'm a Manc, taking the proverbial out of each other is what we do! :D
 
@ westie. i can see your point. the original plan was to cleat all 3 cables, but then it would look like the london underground track. who is to say that a cleat can't support 3 cables? the cables are adequately supported and reasonably tidy. if there was a fire, OK, they's sag, but so would all the existing singles in pvc tube sag. as said before, my original plan was to run on 3" tray, but customer declined the additional £300 cost.
 

Reply to work in progrees in Micro Brewery. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
376
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
944
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

It applies to commercial if it shares the same supply as a dwelling.
Replies
4
Views
575
Bugger that. They end up in whatever position they want :D
    • Like
    • Informative
Replies
4
Views
337

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top