Wylex fuse required in garage

[Ali Ahmed]

Hello everyone

In my garage, I have an old Wylex Fusebox (see attached) containing a 5 and 15amp fuse. Both of them have now blown which means that they need replacing. From reading around the internet, I understand that I can purchase some Wylex MCB's. I've looked on Screwfix and there's a couple I can get. I'm a new homeowner so need a second opinion before I purchase anything.

https://www.screwfix.com/c/electrical-lighting/mcbs/cat7230022?brand=wylex

Can you point me in the direction of which specific ones I need? Many thanks

 

[Pete999]

Hello everyone

In my garage, I have an old Wylex Fusebox (see attached) containing a 5 and 15amp fuse. Both of them have now blown which means that they need replacing. From reading around the internet, I understand that I can purchase some Wylex MCB's. I've looked on Screwfix and there's a couple I can get. I'm a new homeowner so need a second opinion before I purchase anything.

https://www.screwfix.com/c/electrical-lighting/mcbs/cat7230022?brand=wylex

Can you point me in the direction of which specific ones I need? Many thanks

View attachment 47940

Repair the ruptured fuse with appropriate fuse wire

 

[westward10]

You need to address the reason they have ruptured or you may have similar issues.

 

[Pete999]

You need to address the reason they have ruptured or you may have similar issues.

Overload maybe it used to happen, lost count of the number of times I was told to repair so and so fuse.

 

[Deleted member 26818]

You need a blue and a white one.
16A and 6A.
With a bit of luck, the MCBs will plug straight in.
If not, you’ll have to change the bases.

 

[DPG]

Seems strange that both have blown. Do you know why?

 

[westward10]

The bases definitely need changing if you fit mcbs but they normally come with the base.

 

[Pete999]

Seems strange that both have blown. Do you know why?

Overloaded both circuits, wrong sized fuse wire installed, etc etc

 

[DPG]

Overloaded both circuits, wrong sized fuse wire installed, etc etc

LOL. Yeah I get the fuse idea Pete
I meant in this case.

 

[Ali Ahmed]

Seems strange that both have blown. Do you know why?

I don't know. One of the lights (tube ones) was flickering and then both went off. Ive looked at the fuses and they're both blown.

 

[KEV 1 N]

Save yourself a few quid and have a look on eBay, plenty used ones at a good price, some brand new and still cheaper than screwfix.

 

[Blissof89]

If you change the fuse wire turn the main switch off before inserting the fuses.

Having the fuse blow under fault conditions as you are inserting it is not advisable.

 

[KEV 1 N]

If you change the fuse wire turn the main switch off before inserting the fuses.

Having the fuse blow under fault conditions as you are inserting it is not advisable.

Yes and look the other way as you switch it on or use a wooden broom handle

 

[Toneyz]

Is the garage protected by a RCD or RCBO?

 

[telectrix]

Yes and look the other way as you switch it on or use a wooden broom handle

is that trigger's broom?