Questions and electrical advice in the Central Heating Systems - Please post all questions and discussion related to Central Heating Systems in this forum, from installing and wiring programmers, zone vales, room stats, tanks stats, wiring centres. Y Plan, S Plan etc.

If you're looking for plumbing related central heating discussion, visit our plumbing forum instead. If you're searching for advice on the plumbing related aspects of Central Heating then Plumbers link is there is for you..

Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs

Search the forum,
I would like some advice please. A friend of mine has moved into a small flat. There is no Gas supply to the property and so is looking into...
Replies
19
Views
5K
We're new to this house and the old nest 3 stopped charging so they sent us a new one. Hubby didn't take photos of the old wiring since, as he put...
Replies
0
Views
700
So Dad's Old condensate pump went kaput (screeching like a banshee, float valve sticking and wouldn't shut off due to said sticky float valve but...
Replies
2
Views
2K
I’ve currently got a Drayton wiser hub 2 channel for heating and hot water. I’m looking to install hydronic ufh (3 zones) and would want to use...
Replies
1
Views
2K
Hi, Not quite a central heating system but the same kind of pump used I believe. It is used to increase the pressure of the water system when...
Replies
5
Views
3K
Hi, We have recently installed column radiators (stelrad regal) pretty much throughout our house during renovation/extension work. We choose steel...
Replies
4
Views
2K
Hi Firstly if it wasn’t for this forum I would not have been to able to wire my hive controller so quickly so thank you ! Still sort of on...
Replies
5
Views
2K
Hi All, Hope all had a good new year. I’m having a real issue fitting my hive system in my house I’m hoping someone can figure this out for me as...
Replies
15
Views
3K
I got a virtually new Danfoss programmer out of a job that was having a new boiler and controls installed. I fitted it in my house as my...
Replies
14
Views
34K
Hi hope someone can help me, it’s a bit of a long story so sorry in advance. Around 10 months ago we had a power cut and when the power was...
Replies
26
Views
4K
Hello I need to put back a Honeywell Thermostat. There is 3 wires and a earth I have placed the current thermostat wiring in image one and in...
Replies
12
Views
4K
So iv got to add a mini one UFH zone to an existing property's heating system, i have already wired in all the easy parts ie. actuator, zone...
Replies
5
Views
3K
Hi - our heating has packed up and we are trying to resurrect our immersion heater. We put a new heating element into it yesterday and all seemed...
Replies
2
Views
1K
Hello I’ve just purchased a Honeywell Wired T3 thermostat to install. I’ve ran into an issues I have Drayton thermostat in the hall wall which I’m...
Replies
1
Views
2K
Hi I recently bought my property from my (now former) landlord. In the past, my former landlord instructed gas engineers to set a service...
Replies
1
Views
4K
Hi I’m not long registered and want to send thanks in advance for any advice which can be offered. A quick bit about me…..I qualified as a sparky...
Replies
0
Views
1K
Be grateful to know if anyone is aware of a smart stat system that's built-in dual zone CH as well as standard timed DHW. As far as I know, Nest...
Replies
3
Views
1K
Good evening to All, Hope all is well. What I would like to know is if possible to run all 3 channels at once, on same timings. Heat upstairs...
Replies
5
Views
1K
Good evening my pedigree chums. Can someone please tell me what I need to get to supply a stat going on a free standing base, because it is not...
Replies
1
Views
1K
Hi. Please can someone offer me advise. I have a 1 bedroom flat with storage/comfort heaters (don't know which) that I don't turn on as I can't...
Replies
14
Views
2K
Purchase one of these a few days ago, its a FantiniCosmi CH110 stat with no fancy controls, just settable winter and summer settings and settable...
Replies
4
Views
2K
Hi all, first of all I'm not a sparks so forgive my ignorance. We are currently getting a boiler stove installed. This involves connecting the...
Replies
3
Views
2K
Hi Ladies and Laddies, Could anyone help identify the terminals for this old combi? I arrived at the property which has been undergoing a...
Replies
2
Views
848
My current room stat is a honeywell t6360 wired as shown in the photo. I wish to replace this with a wireless controlled bht3000. Any help...
Replies
15
Views
7K
Hi all, I have a quick question. I live in a ground floor 1 bed flat. The building is pretty old, the wall on the front/right side & back is...
Replies
3
Views
2K
Hi In a new property and the boiler is not firing. Investigating the junction box, there is a disconnected wire -labelled Unknown Red in image...
Replies
15
Views
2K
Hello. I'm a novice, so please go easy easy on me. I'm just wanting some advice. Though I have successfully installed a few Hives. But this is...
Replies
5
Views
797
hi there thanks in advance for helping was just wondering if anyone had diagrams of y plans which i think are combi boiler wiring diagrams
Replies
12
Views
3K
Wired all the usual for a boiler a while back, room stat in lobby & programmer in kitchen. Was an old boiler which has now packed in. They’re...
Replies
0
Views
656
M
Weird one this. 3rd UP2 Programmer fitted by BG since January to replace an older version of the same type, which was a pretty basic model..(can't...
Replies
28
Views
42K
I've been wondering.... There are two estates of bungalows near me, all built together, all with traditional system boilers with tanks and...
Replies
26
Views
3K
Hey there, I have a Honeywell TH3210D1004 thermostat that I've replaced with a Honeywell T2 thermostat. I'm not an electrician by any means but...
Replies
5
Views
1K
Hello lads . Not seen the job but my old buddy the plumber has informed me today he has replaced an old cylinder with an unvented . Alarm bells...
Replies
0
Views
1K
I need to 'make a solution' for adapting an overly complicated heating system to work with a less than ideal existing Tado setup. It's not a...
Replies
1
Views
2K
Hi everyone, my am2 is fast approaching and i need help with understanding how s plan wiring works. I understand the different parts in the system...
Replies
16
Views
17K
As usual, a problem arises nearly last thing on a Friday!! Was wiring a kitchen for someone this week & the customer noticed this afternoon before...
Replies
9
Views
3K
Hi there, i have zero electrical experience, but am looking to replace my wireless honeywell CM927 / BDR91 Control unit with the Nest 3. This is...
Replies
10
Views
12K
Hi chaps I’m wiring up a 2 zone heat system to a combi boiler. Do I need to replace the boiler mains cable with a 4 core cable and remove the link...
Replies
4
Views
3K
I have a Dimplex Opti-Myst and it's become faulty. I changed the ceramic rings to be on the safe side after I needed to change the 24v fan on the...
Replies
0
Views
2K
have a heatmiser uf8 and originally used 5 outputs number 1-5, I then found output 1 would not work properly so i transferred the wiring to number...
Replies
0
Views
2K
D
hy all just got my first home and it has a heatrae sadia electromax boiler in well after turning it on for most of day everything seems to be...
Replies
11
Views
29K
Hello, I have never done any electrical wiring myself, but I think I should be able to do this with some kind advise from you. I would like to...
Replies
15
Views
3K
Very long story short (a rushed house move and complacency mainly), but I am in possession of my Hive SLT3 Single Channel heating wireless...
Replies
1
Views
2K
I have a customer with a problem of RCD tripping caused by the wet UFH systems. There are 5 UFH areas each with a Wilo Para pump attached. Along...
Replies
29
Views
6K
Hi all in the forum, I have a 6 radiator Y plan system with pump over run. There are 5 TRV's on the rads and the living room radiator is open at...
Replies
9
Views
2K
Builder installed 175w / sq metre in an area 6.7 x 3.5. What should the fused spur be rated at and should it have a contractor as well? Am I...
Replies
24
Views
8K
Hello all, I just moved in to a new flat and it came with this beauty. I have absolutely no idea how to operate it, though and there’s no manual...
Replies
3
Views
5K
Got a combi boiler controlled by a Drayton room stat, the one you manually turn the dial round to 30 and the boiler comes on and then turn it...
Replies
10
Views
2K
Post a New Thread / Question

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock