-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the Electric Underfloor Heating Wiring - Electric Underfloor Heating Wiring Advice by Electricians Forums is Expert Advice from a community that started in 2006. We are the largest electric underfloor heating wiring forum. And our advice is second to non. Discounted under floor heating for all provided by uHeat.
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Search the forum,
Forum Prefix Filter
Hi all my ceiling heating stopped working recently and I want it back on for the winter. I have checked the feed to the contactor which was live...
Hello. I was called to a house yesterday where the electric underfloor heating doesn't function. The supply is good but the customer did say that...
Had a great job with an old mate of mine,he wasn’t to sure how to connect ufh heatmiser wireless system.
Did all the hard graft,conectted all,fuse...
I have a heating system that will have ufh and standard heating upstairs. There is a motorised valve on the heating system but the plumber hasnt...
I'm looking at installing Ecoflex loose cable under the floor in my bathroom. I'm also going to be installing a large mirror, running the length...
Hi Guys,
My underfloor heating has 3 x 32amp contactors. They make a hell of a thump when opening and closing. Bit of a hum also.
I'm looking at...
Hi all,
I posted this week about an omnie UFH wiring centre I’m installing, it’s my first install of this kind and I’m unfamiliar with it.
The...
Just your thoughts on this one,helping a sparky out on a real nice ufh system wireless stats & heatmiser wireless control box.
i asked you got all...
Hi guys.
Moved in to a new house last year. We have underfloor heating in all of the rooms. 10 zones.
I see they have chinese copies of Honeywell...
Help required please re PRT-E thermostat wiring symbol (difference between models and compatibility)
Hi all, firstly I’m not in anyway qualified to do any electrical work but was just hoping for a quick piece of help In regard to trying to find a...
Could somebody run their eyes over this diagram and let me know if I’m about right. I’m new to UFH and UH8 in particular. It’s a viessmann...
Hello
My Aube TH232 is showing the error message HI which means the actual floor temprature is above 70C
But its not....the floor is at ambient...
Hi, just recently wired in my single zone (4 loops) wet UFH system. I found it relatively simple as I think it is a basic layout. Heating is S...
Hello
I recently had a Warm-up underfloor heating system installed, but due to a breakdown in communication. I ended up with the basic Mstat...
Hi all, new member here with a technical question.
I am doing a refurb and want to know if I can connect a 300w electric radiator to the...
Hi,
I've not really got involved in underfloor heating before, but a customer asked me to replace her OJ Microline manual stat for her bedroom...
never installed one of these before, always used the element on a roll type. question is how to cut to turn a corner 90 degrees without leaving a...
Hi guys. I have a question about wiring scheme and how to wire my heating floor thermostat. I have this scheme and correct me if I am wrong but I...
- Locked
I have fitted underfloor heating, using a WarmUp Wifi thermostat.
When i turn it on, the RCD trips after 5 seconds on initial turn on.
I have...
Hi everyone wondering if any one can help point me indirection I have a heat mat installed with a ntc5k sensor and client is looking for a new...
Hi, I'm just looking for some advice and info about how to replace our thermostats with Nest ones.
My current setup is (images attached):
5...
- Redirect
N/A
Hi guys
Being to a job today where the builder has installed some electric under floor heating
Total area is 20.5 m2
The mats are 150w per m2...
I don’t want to see my sister ripped off, so I thought I’d ask a quick question of you guys if I may?
My sister had underfloor heating installed...
- Redirect
N/A
Hi - I have a Warm-up underfloor heating system. And it's stopped working. I did a basic resistance check - and clearly there's a problem (shows...
Hi fellow electricians,
Wondering if anyone out there can kindly help me out? I have a underfloor heating controlled by UH3 heatmiser.
When...
Hi Guys,
I have a multi-manifold underfloor heating system. The multi-zone manifolds all operate nicely turning things on and off as appropriate...
Hi
I am planning on installing two UFH mats,
One 9m2 the other 6m2, i have the one controller, (living room / dining room)
Is it ok to put both...
Hi all.
I’m just planning out my electrics before boarding the new en suite.
Can someone verify.
Should a fused spur come directly from a socket...
recently installed underfloor heating in my glass room 16m2 the under floor heating is 1800w which im told is 160w per square metre anyway issiue...
Arranging ufh in kitchen+adj utility. Lots of conflicting advice re probe position.
(What makes sense to me).
1. Fit in conduit for ease of...
Hi,
I've installed wet UFH in my place.
I'm struggling with how to wire it up. My gas man is coming to do some jobs and give me a hand starting...
Hi All
Have a polyplumb manifold and want to put a radiator circuit from it, can I use speedfit pipe or is it best to use polyplumb? I have shed...
I haven't had the chance to install an UH8 before and it looks a cracking piece of kit.
However I'm a little unsure on best place to get a Live...
Hi Guys.
I have a flat with a 9KW electric boiler, dedicated for the wet underfloor heating system. The tenants have reported that all the...
Hello,
New to the forums, I don't know if anyone is able to help me or give me some advice or tips (I'm not an electrician).
Me and my...
Eh up :)
Client (doing other work there) accidentally smashed up their underfloor heating controller in their kitchen. The only thing I've been...
Just for your information, to conserve energy consumption with your underfloor heating, it is a great idea to replace your old thermostats with...
Gaffa asked me to knock up a "laymans" wiring diagram for Client.
Before I hand it over, be nice to have a few thoughts so I don't make stupid...
Hi All,
I have a wundafloor 3 zone uf heating system and a separate rad system running off a Baxi Ecoblue Advance heat Boiler and Megaflo tank...
Hi. Customer has a Heatmiser UH8 with only 4 heating zones been used. Controlled by the slimline thermostat. looking at replacing the thermostat...
Hi all,
I'm attempting a repair on a comfort zone underfloor heating mat.
The customer lifted a floor tile and in doing so cut through the...
Im Working on a new build site at the moment, and the kitchen layout has changed to include an island with a hob on it.
Meaning im goin to have...
Hello everyone.
I have had an electric heatmat installed into the subfloor according to the manufacturer's instructions.
heatmat dot co dot uk...
Hi All,
I've taken a look at a consumer unit today and noticed that the previous electrician wired bathroom underfloor heating using a 20A...
Hello everyone
I wondered if you would be able to help me with a project at the moment, I am looking for information about your experience with...
I am planning to put underfloor electric heating in one of the rooms with total power of 1100 watt.
Can I power up the thermostat and UFH (via...
I'm planning to install a U-Heat mat in a small en-suite. Never done one before. The thermostat will be on the adjacent bedroom wall. What is the...
hi all, I want to change my rehau programmer to a hive so I can operate it from my phone. I have 4 zones all controlled from a hydronic master and...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)Oh that house is AMAZING!!! Have you been inside? Has it got massive chandeliers? I would hate...- Latest: Lou
-
-
Neutral PoleElectricity doesn’t care if the load is a single star connected device or 3 separate loads...
- Latest: James
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.