Questions and electrical advice in the Electric Vehicles Advice Forum - Electric Vehicles Advice Forum for the USA, UK, and more. Find advice on electric vehicles and their faults and diagnosis with regards to batteries and reverse charging. Charging stations, charging installation schemes, and various other electrical car issues and fixes. Tesla electric vehicles. BMW Electric Vehicles. Videos, advice answers and questions on all makes and models. 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021..

Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs

Search the forum,
I have done the c&g courses, done the manufacturers courses, registered with olev all set up to go Got my first EV job come in, nice easy job...
Replies
21
Views
4K
Hello, Yet to dip my toe in EV and have been trying to avoid it to be honest. But have just been presented with a situation and just wanted to...
Replies
1
Views
2K
Hi, I've been asked by the DNO to install a load limiter for the charger as it is right on the MD. I know Podpoint have the CT clamp and cable but...
Replies
3
Views
5K
Howdy- I am a newby to your forum but in hope someone can set me straight on this nagging question in my mind. I am converting my boat's 12 volt...
Replies
13
Views
2K
Hi All, looking for some setup advise around a new EV charger installation at a Domestic Property. The customer has a single phase 100a supply...
Replies
1
Views
1K
I am considering fitting a car charger using 6mm SWA to a new isolator switch in the meter cupboard and then 6mm T&E to the CU. It would save...
Replies
3
Views
8K
I run some computer case fans from a 12volt car battery in my Garage to keep the air flow moving and prevent condensation in winter. I borrowed...
Replies
8
Views
1K
Hello, My name is Guillermo and I work for Ecoluz Consultores, a Spanish engineering company specialised in the segment of energy efficiency...
Replies
1
Views
884
At some point I'm going to get asked to fit one of the above and I'd like to know a bit more about it from some people that have already fitted...
Replies
28
Views
8K
Hi Guy's, Greetings from Spain! hope everyone is doing well? Name is Dennis 33 years old and have a small small background in electrical...
Replies
1
Views
1K
I apologise in advance if this has been covered but I’d like to get confirmation please. I want to register our company with OLEV, I’ve read the...
Replies
3
Views
2K
hiya chaps I did a City and Guilds course, practical assessment and exam for the CG2919 on Monday and Tuesday, we were told about the...
Replies
52
Views
10K
So my understanding is I need to be trained with a particular manufacturer before becoming OLEV registered? Just wondering if anyone has...
Replies
1
Views
2K
hi guys I’m thinking of taking the c&g 2919 course Has anyone taken this course and found they get much work through being OLEV registered. I...
Replies
13
Views
10K
We're getting conflicting views on whether we need specific charger test equipment for EV charger installations in homes and it's very...
Replies
7
Views
1K
I am a bit unsure of what Amendment 1 is saying regarding EV charging points and PME. I understand the existing 3 methods in section 722.411.4.1...
Replies
0
Views
974
Was doing a periodic last week and came across one of these outside a factory. The factory has a TN-C-S earthing system and is connected direct to...
Replies
4
Views
2K
I'm just interested in the technicalities of charging points, specifically with PME supplies, I know there's been a few threads on here, but I...
Replies
34
Views
6K
I know the ENA introduced a new process for informing DNOs, previously it was OK to advise the DNO after if you were within the maximum demand up...
Replies
1
Views
1K
I understand that some vehicles do a check on the earthing resistance before they allow themselves to connect to the charging point, so...
Replies
4
Views
4K
Just wondering if anyone has any experience of the following: Type B RCD + 2 MCB Garage / Mini Metal Consumer unit - EV Charge Point Install -...
Replies
1
Views
2K
Guys, i like to have a broad knowledge base and range of work, as i get bored doing the same things day in day out. From working on F1...
Replies
6
Views
10K
Hi i need some info on a few electrick parts for a electric car any help would be so greatfull 1573401889 I have a Peugeot Expert fully electric...
Replies
20
Views
4K
Hello guys I own a BMW E39 which developed a crank no start issue. No codes are being thrown but my initial thought was fuel. So I checked the...
Replies
0
Views
856
Hi, Can I ask some advice on what to bury please? This is the the front of my house in plan view. House at the bottom. Porch at the bottom left...
Replies
3
Views
2K
Hello, I am currently in the process of trying to get a charging point fitted to a detached double garage and it is proving to be a bit of...
Replies
9
Views
2K
Hi there, I have been offered an opportunity to do some EVC training through my local wholesaler. They are putting on a course run by the NICEIC...
Replies
6
Views
3K
Deleted member 105166
D
Sorry if this has already been covered..... I’ve tried searching with no luck ! I’m after some info please on what is required to get set up to...
Replies
35
Views
7K
D
Replies
Views
N/A
Advice provided to and sought after with regards to Electric Vehicles in this forum :) Please post a new thread, so the electrical vehicle...
Replies
0
Views
782
Hi guys, Anyone here Napit registered or has electricians on their own Napit scheme? I've not too long ago done an EV course all fine, Rolec...
Replies
6
Views
4K
I have 2 x 11 kw Porsche units to install. I have read through section 722 and couldnt clarify... 1. Anyone aware if theres a min/max distance...
Replies
5
Views
1K
Hi there I’m unsure of what wiring I need to run for an EV charging point and have read that there were new requirements launched in January...
Replies
3
Views
2K
Looking to get trained/qualified on the EV charging point installations. To those of you who have gone down this route which way did you go about...
Replies
15
Views
6K
Hi all, I have been asked to install an EV charging point for a friend who doesnt have an electric vehicle but would like either a cable ran in...
Replies
30
Views
8K
All government funded home chargepoints for electric vehicles must use innovative ‘smart’ technology from July 2019, the government announced on...
Replies
0
Views
1K
Hi have been looking into the city and guilds 2919-01 electric charging point course to become olev registered and approved by ROLEC. I have...
Replies
3
Views
2K
I'm considering a career change or trying to implement a 50/50 split between my current work in IT - largely working in a technical capacity as a...
Replies
2
Views
2K
Good morning fellow electricians. Now, as I am sure you have all been enjoying, I have not been on here much lately, as I am jacking in very...
Replies
12
Views
2K
Hi all, I've not a lot of experience with EV but was called to a local job to investigate a loss of power to a 32amp 7.2KW EV charger. It turned...
Replies
12
Views
31K
I have a nice job on in a few weeks which includes wiring up a solo chargepoint EV point. The pod doesn’t have its own RCD like Rolec do. I am...
Replies
9
Views
3K
Hi there, I have just joined the forum. I have been involved in the electrical and electronics industry for over 40 years. I am now involved...
Replies
3
Views
1K
I install EV chargers, often under the OLEV scheme. next year all chargers subsidised by the government will have to be 'smart' we all know how...
Replies
6
Views
2K
Deleted member 26818
D
Good afternoon ladies and gents. Could someone please tell me if qualifications are required to install the above kit, or they need to be...
Replies
3
Views
1K
I am currently doing an EICR in a warehouse and one of the circuits is for a Fork Lift Charging point (32A) In Light of the 18th Edition and all...
Replies
3
Views
2K
This has been discussed before but I'm still not clear and would appreciate input. I'm installing a home EV charger (Andersen A2) and need to...
Replies
9
Views
16K
Hello, I live in jordan. We have a 380Vp-p, star, 4-wire, earthed neutral connection to the building. We get 220V to the apartment. I have...
Replies
4
Views
1K
I am looking at section 722 of 18th edition for EV charge points. Section 722.411.4 imposes restrictions on the earthing arrangements for TN...
Replies
13
Views
5K
Hi folks Trying to make sense of the Regs regarding RCD types for a standard 13A socket intended for electric vehicle charging. Looking at...
Replies
70
Views
15K
I have previously worked as a field service and installation engineer (AV DATA CAT5 areas) for over 12 years, although i am currently working in...
Replies
11
Views
4K
Post a New Thread / Question

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top