Questions and electrical advice in the Electrical Appliances Forum - Electrical appliances and white goods forum. Washing machine repairs, tumble drier repairs, fridges and freezers that have seen better days and need a decent spark to sort them out..

Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs

Search the forum,
I thought about a project about a smart touch screen for refrigerators a while ago, so I designed its UI interface. But I don't know much about...
Replies
5
Views
1K
I experienced the common issue of the condenser frosting up so the air can't circulate around the freezer or up into the fridge so it all gets...
Replies
15
Views
3K
Existing double gang socket in the corner of a kitchen on a dedicated 12m length above ceiling 2.5 final circuit to CU, was used for a WM and a...
Replies
6
Views
3K
Hi, So we’ve had this cookology counter top dishwasher - been really great for our kids milk bottles and a few dishes here there. Anyways, I...
Replies
2
Views
4K
I have a swan 20l nordic digital microwave which turns on everything seems normal but when cooking does not heat anything. any ideas how to fix...
Replies
2
Views
1K
Any idea where to find the following part? The bottom element that it controls is not holding the heat & temperature dial is showing hhh.
Replies
8
Views
1K
I was having a dishwasher delivered from Best Buy but they wouldn't install unless I had a dedicated outlet for the new d/w plug. I looked up code...
Replies
2
Views
5K
Renter bought a new dryer because the old one wasn't heating. New dryer did the same. Returned it. I checked the plug, 124ish at the ground and...
Replies
1
Views
681
Hi, My Wahl Home Pro corded hair clipper has stopped working......3A fuse is still good. No sound, no movement , no nothing.......i took the blade...
Replies
2
Views
2K
Hi all, I am here just doing some research. We have a tumble dryer with a moulded plug fitted. The appliance is approx 6 years old and we have...
Replies
2
Views
8K
I've got a CDA ECP62SS/2 extractor fan, can anybody tell me how to remove the lights so I can change the bulb. Also what type of bulb is used in...
Replies
3
Views
2K
Is it legal to have an electric clothes dryer and washer in the bathroom along with the toilet, shower and sink in Canada ?
Replies
0
Views
72
Hi, I have hair curler. The led is shining, but the part of curler that might be hot doesnt work. I tried where electricity is and whete isnt...
Replies
0
Views
719
I have an 80's oil-filled heater at home and although it's almost in mint condition on the outside, it's the heating element that's giving me...
Replies
5
Views
2K
My indesit ifw6340 oven packed up recently. Was working fine, turned it on and it never heated up. Tried it again the next day and and it gave me...
Replies
4
Views
6K
Hi, I'm doing some research to see if I'll be able to add an electric 240V/30A washer/dryer combo to my condo. Please see attached photos, I have...
Replies
3
Views
849
I have an old Baumatic oven that hyas been tripping out my new fuseboard . I removed my old element ..photographed the wire connections..or so I...
Replies
10
Views
4K
Scenario... 2 x switched fused spurs located in a shower room. They are 610mm from side of shower, so outside zones. However, they could still...
Replies
6
Views
1K
A strange small job this afternoon. Stoves oven : another sparks had proclaimed the element was faulty and causing the RCD to trip. Householder...
Replies
9
Views
2K
Anyone know anything about Blizzard bar fridges? Just a two door bottle fridge. my customer says that the display is showing HH, but then after a...
Replies
9
Views
8K
So I am trying to help a family that was given a 240v electric dryer. They live in an apartment complex and unfortunately cannot modify the walls...
Replies
13
Views
1K
Hi, Can anyone advise how these cables would be wired into the socket please. How a grey,black,brown & blue would go into a brown & blue socket ...
Replies
8
Views
1K
Hello everyone. I've bought a second hand Bosch series 6 (2 years old, minimal use). The first washing went without any fault during the cycle...
Replies
1
Views
1K
Hello everyone. I've bought a second hand Bosch series 6 (2 years old, minimal use). The first washing went without any fault during the cycle...
Replies
0
Views
2K
This unit is around 20 years old. Parts are hard to source for anything that old. It is branded Bosch, Model number KGU6695, though I think it...
Replies
0
Views
2K
The earth strip on our tumble dryer needs replacing as the drum spindle has worn through it. A replacement strip is around £10. As the strip is a...
Replies
11
Views
3K
I need to change the door on a Bosch fridge freezer KGN49AI30G Looks like a straightforward job apart from the requirement to remove the display...
Replies
17
Views
8K
I want to put a 16mm compression gland into an oversized round plate, say 100mm dia or smaller, basically to act as a stopper against a loose...
Replies
11
Views
1K
Hello sparks, I'm looking for some advice as to see how I can wire up and test hand dryers prior to purchase. As they're generally unwired...
Replies
21
Views
2K
Rangemaster classic Power to main fan oven power light stays on when switched off and element heats up to maximum although the switch works...
Replies
0
Views
476
Our neighbours oven knob has sheered off when the builders were replacing the kitchen ceiling... Anyway does anyone know where they can find a...
Replies
2
Views
2K
Hi I’m getting very frustrated have a 4 slice swan Nordic toaster the elements in the middle will not heat have done a continuity test and would...
Replies
2
Views
2K
Hello. My pc: 10850K stock 4800mhz stock Kraken X73 good temps 2x16 GB DDR4 GSKILL 3000mhz XMP Seasonic Tx-850 Ultra Titanium Gigabyte Rtx 3090...
Replies
17
Views
2K
Best Buy just delivered my new Samsung dryer and brought a power cord with a NEMA 10-30P plug. My dryer receptacle is NEMA 10-50R. They claim I...
Replies
3
Views
1K
Hi There, Homeowner here with no electrical knowledge, so go easy on me! We've had our garage converted, and coming to the end of the project...
Replies
24
Views
4K
Hi folks I have a Meile fridge freezer KD12813S and it did not turn on . I think Ihave found the problem , the starter next to ther compresser , I...
Replies
10
Views
3K
The photo shows a cooker hob ignition switch unit from a Neff/Bosch hob. One of the switches has failed. The issue was caused I think by ingress...
Replies
5
Views
2K
Hi I'm about to purchase an American style tumble dryer - 4750 Watts. I know this needs hard wired. My question is, can this be hardwired into the...
Replies
8
Views
3K
Hi all, I live in a townhome in Northern Virginia built in the mid 80's. I currently have a 30A double pole breaker feeding 220v to my laundry...
Replies
8
Views
6K
I got called out to this today. I was told the main oven fan was working but not the element. Now normally, we don't get to look at the back...
Replies
6
Views
2K
Hi, the main heating element in my Smeg fan oven has blown again (10 yr old model, element replaced 4 yrs ago). A search online has offered...
Replies
4
Views
1K
Hi, hoping someone can help me, have a Lamona HJA5110 range cooker, previously had a new element fitted on the RHS oven and it was overheating, so...
Replies
1
Views
967
Hi. Just moved into a house and it has a Neff C28MT27N0B combination microwave oven. Apparently it's out of warrentee. The microwave works fine...
Replies
2
Views
1K
Post in thread 'Hard wiring American style dryer' by Rhys91 has been reported by James. Reason given: Content being reported:
Replies
1
Views
82
Hello all, Our Fridgemaster MTRZ110 freezer is, I think, playing silly bu??gers. Certain foods freeze as expected, ie rock solid, others not so...
Replies
3
Views
1K
Hello. I have a Bush fridge freezer that is about 5 years old now. It has an autodefrost feature. About 6 months ago i noticed ice was building up...
Replies
11
Views
2K
Hiya, Had a Triton T80 8.5Kw shower for the last two years in upstairs bathroom connected to the mains cold supply. Its still working but...
Replies
44
Views
7K
I have a Hitachi TV which was wall mounted but now I've moved there's no room so needs to go back on base. I've lost the screws the ones I need...
Replies
4
Views
881
My daughter bought a 2 bedroom flat with e7 storage heaters, no gas supply. 2 of the 3 heaters are not fully working (only instant heat elements...
Replies
6
Views
1K
Hi, i am attempting to change the element on my Neff B14M42N3GB oven. However, when I got to the element it appears the screws holding it have...
Replies
2
Views
4K
Post a New Thread / Question

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top