Recently started a retrofit where the 3 phase dB has been fitted with bushes through the galv trunking. The single phase supplies outgoing have been separated and lines pulled through one, neutrals another and the CPCs through the last one. My supervisor says this is ok, as it is a 3 phase db, I disagree. What's the thoughts.
-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
- Thread starter cadthesparks
- Start date
- Replies 1
- Views 494
Discuss 3 phase dB and eddy currents in the UK Electrical Forum area at ElectriciansForums.net
Three phase or single phase it is not correct.
Reply to 3 phase dB and eddy currents in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Just stick the 63amp fused connector before the Henley block , or Lucy block as you call it, and your all good,
as for your 2nd point, ,
the...
- woodster92
- UK Electrical Forum
- 1
- 672
- Question
Ok Dave thanks, no more accidents yet 🙏😂….
- Question
Hi Dave I have attached a photograph of how we achieve this when the two units are powered from the same supply but as this one has two supply’s I...
- JJelec
- UK Electrical Forum
- 2
- 1K
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
2 x t&e for 3 phase isolatorIt’s a C3. Somewhere in the regs (I would have to have a copy with me to remind myself where!)...- Latest: Rockingit
-
Song words.West BOUND And Down View: https://youtu.be/ZmXD_DKNuEs?si=u6f61VjJ2VN09CAx- Latest: littlespark
-
What pets do you have, and what pets have you had?Just to add to my bunny post above…. A picture my daughter painted a few years ago. We had...
- Latest: littlespark
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.