I have a 1 HP Dayton motor model 5k673. It is being replaced with 31TR91. Need help with wiring. I was able to confirm line (L1) abd (L2 230v) Connections, but I have 2 wires left and I am not sure where they go. This is a hangar door, and the wiring is attached to a 3 pole switch. (open/up), (center/off), (down/closed). Can someone help me with this?
Discuss I have a 1 HP Dayton motor model 5k673. It is being replaced with 31TR91. Need help with wiring. in the DIY Electrical Advice area at ElectriciansForums.net
- Reaction score
- 9,075
see attached wiring diagram
James, I have that wiring diagram, but it doesn't help with the wires coming off of the Hangar. We were able to figure out the Line and high voltage but are left with 2 wires and cannot figure out where they go.
- Reaction score
- 1,672
The new motor a wiring diagram on the cover.
Reply to I have a 1 HP Dayton motor model 5k673. It is being replaced with 31TR91. Need help with wiring. in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
- Question
- Question
- Question
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.