Recent content by Santa

  1. S

    UK Hardwiring an induction hob

    Thank you all for your advice and information. It looks as if I can go ahead and order the hob.
  2. S

    UK Hardwiring an induction hob

    if you're using the socket for a kettle say and your cooking xmas dinner there's always a chance the 32 mcb will trip. We have never used the socket so that shouldn't be a problem.
  3. S

    UK Hardwiring an induction hob

    I suspect that's because the Electrician who wired up the cooker forced an MK breaker alongside the Contactums.
  4. S

    UK Hardwiring an induction hob

    The cable is a direct 8 metre run under floorboards
  5. 20250213_095217.jpg

    20250213_095217.jpg

  6. 20250213_095649.jpg

    20250213_095649.jpg

  7. S

    UK Hardwiring an induction hob

    This is from the specification details. Burner Power Range - 2.2 to 3.7 KW Electrical Connection - 7400 Watt Power Requirements - Needs Hard Wiring By An Electrician
  8. S

    UK Hardwiring an induction hob

    I just realised that the hob power is 7,400 watts. Does that make a difference?
  9. S

    UK Hardwiring an induction hob

    Great - thanks.
  10. S

    UK Hardwiring an induction hob

    I already have a 3kw double oven hardwired with 6mm twin and earth, direct to the consumer unit. Can I also add a 2.7kw hob to the same circuit? Alternatively, can the hob be hardwired to the kitchen circuit?
  11. S

    The fun and stress starts again, planning application submited.

    I like to watch "The Big Build" and it's amazing what they find when they start pulling the plaster off. Timber framed houses seem especially bad. I often wonder what the neighbours in identical houses think after seeing that.
  12. S

    When did I get this old, there’s been a mistake?

    You probably don't need expensive glasses with designer frames from an optician. I buy mine at 2 times magnification from a Chineses seller at £10 for three pairs. At that price, they are pretty much disposable. I also have a three times pair for close-up work like tightening those tiny screws...
  13. S

    What kind of motor is this?

    You got it exactly, although it didn't blow a fuse, it just cut out at the switch and I had to start again with much mockery from the others . It was started as you say with the overhead shafts turning, but all the drive belts were disengaged. We just slipped the belt off the side of the pulley...
  14. S

    What kind of motor is this?

    One of my earliest jobs was working in a small brick factory in the Cotswolds. Every morning my first job was to start the motor that ran all the machinery through an overhead pulley system. This was a hefty beast, from memory it was a least a couple of feet diameter and was controlled by a big...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert

Back
Top