Refurb | on ElectriciansForums
Guest viewing is limited

Discuss Refurb in the UK Electrical Forum area at ElectriciansForums.net

Joined
Jul 12, 2010
Messages
7,316
Reaction score
3,008
Location
Kent working back out there yet again
These are on the of the refurbished areas we are doing. The building unfortunately for us is occupied so it makes the job a bit challenging. Picture below is the main trunking that will run down the central corridor it is a wierd size, it equates to a 6 x 2. This is for small power and lighting.

Next to the trunking is the lighting conduit. Again we do it slightly different over here we drop down in Ally flexible as you can see.

[ElectriciansForums.net] Refurb

Below is inside one of the rooms. Just to show the trunking continuing and again we come out of the trunking in Ally conduit and then connect back into ridgid via a pull box. At first never liked this way, but I have to admit it does give you flexibility


[ElectriciansForums.net] Refurb


Bellow is one of the rooms, that is nearly finished. This will not have a false ceiling. It shows how we fit the lights to the concrete slab. They are actually hung of 6mm threaded rod and we slide the conduit over them. Again over here they are not hung via hooks and chains, and again I quite like this way of doing it, far safer in my mind


[ElectriciansForums.net] Refurb
 
A very high quality of installion Malcolm, nice job there fella.

Thanks Mike.

Been back 10 months and like always with a new crew you have to start all over again. I'm getting a bit long in the tooth now for climbing up towers and scaffolding lol, but I've done it...again

But they are getting there which is why I like to post the pictures, and they are getting to the point now where I only shout about 4 times a day at them.

I have to be honest though I was doing a saddle set and in the end I had to show them what I wanted...........so somewhere hid away are about 6 lengths of conduit that went slightly wrong :smilewinkgrin:
 

Reply to Refurb in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Obviously not a building/DIY forum so will keep it short but yes - we've taken all the floors up. Several joists in the bathroom need doing as...
Replies
8
Views
2K
  • Question
By retired electrician, I mean that I have retained my ticket but no longer do installation work. Thanks for the clarification. I missed that it...
Replies
2
Views
442

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Thread starter

Thread Information

Title
Refurb
Prefix
N/A
Forum
UK Electrical Forum
Start date
Last reply date
Replies
5
Unsolved
--

Thread Tags

Tags
None
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top