Old TN-S supply too cautions?? | on ElectriciansForums

Discuss Old TN-S supply too cautions?? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Joined
Dec 24, 2016
Messages
404
Reaction score
82
Location
london
Hello guys

Turned up to a job today and carried out the usual checks on the earthing system before i began work and found the supply authorities earthing conductor had been a piece of 1.5mm bare cable wrapped around the outside of the SWA, it looked like a real bodge job.

I said to the client UK Power networks will need to confirm if this is safe and it may need to be upgraded to a PME system.

UK Power networks are due to visit as i said i dont want to make alterations or additions to an existing installation which looks inadequate, whilst a healthy Ze had been achieved 0.30 but the earthing system did not look up to scratch.

Question is am i being too cautious in my younger years?, i did not take any money from the client just advised what to do next and will consult them on UP power networks observations?

[ElectriciansForums.net] Old TN-S supply too cautions??
 
Had a similar issue last week, about 3 strands of wire wrapped around lead sheath, not even sweated on, although it was providing a low Ze. CalledUKPN emergency number, told them it looked way to ropey, they came round next morning and put a new clamp round the sheathing.
 
The picture is unfortunately out of focus but it does look as if there is some sort of bond between the outer conductor of the cable and the earth wire so it may have been sealed to the cable and probably ought to have a sheath over it. If this is the case then it should be OK.
However if you are unsure then it is better to ask the DNO and check than to assume all is well.
 

Reply to Old TN-S supply too cautions?? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
284
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
783
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
800

Similar threads

Are you sure they are back-feeding and not a legitimately grid tied system or systems with an island mode. Whilst the term is not strictly defined...
Replies
1
Views
328
davesparks
D
  • Question
That was my saying not long ago about TNS to PME system. I would be nice you can ring up the DNO, will the systems being up graded, there is a...
Replies
9
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top