Optimal panel will not reset | on ElectriciansForums

Optimal panel will not reset

Discuss Optimal panel will not reset in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

albi

albi

-
Joined
Feb 11, 2009
Messages
124
Reaction score
7
Location
north east england
Hi every one
I have a optima XL6 panel but I think some one has changed the PCB from another optima panel and I don't seen to be able to reset the NVM back to factory and help whould be gratefully appreciated

[ElectriciansForums.net] Optimal panel will not reset
 
Last edited:
[ElectriciansForums.net] Optimal panel will not reset

Just done a Google Images. Says its a Texecom Odyssey...
 
albi said:
hi Spoon
i think you have mis read your google image its asking how to fit a texecom odyssey bell box to that panel
Click to expand...

balls.... I need to go home...
 
Second guess.. On Ebay.
Looks [ElectriciansForums.net] Optimal panel will not reset
 
buzzlightyear said:
Texecom bell to the Honeywell panel
+ve supply A to D
OV D TO A
VE C TAMPER to T VE TAMPER RETURN
VE BELL B TO B VE SOUNDER TRIGGER
-VE STROBE S TO STROBE -
Click to expand...

That's down to me posting incorrect info @buzzlightyear

What the OP's after is to "reset the NVM back to factory" but was thinking the alarm PCB was not a XL6.
 
spoon is the old optima XM.
power down
factory tests to remove wires from 9 and 19
put a link 9and 19 power up
the panel will power up with no alarm condition
with a cleared NVR the tamper and the indicators will remain steady
remove the links put back 9 and 19 and the way you go
 
buzzlightyear said:
spoon is the old optima XM.
power down
factory tests to remove wires from 9 and 19
put a link 9and 19 power up
the panel will power up with no alarm condition
with a cleared NVR the tamper and the indicators will remain steady
remove the links put back 9 and 19 and the way you go
Click to expand...
wrong.power down.connect PA 13 to set + 23. power up. power down, remove link. might need to do it twice.
 

Reply to Optimal panel will not reset in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net

News and Offers from Sponsors

PCBWay
  • Article
Meet PCBWay at electronica A1.163
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
271
PCBWay
PCBWay
Electrical2go
  • Sticky
  • Article
📢 Best Sellers Catalogue Now Available! 📢
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
770
Bob Labla
B
Dan
  • Article
The Official Sponsors of ElectriciansForums - There are currently 8
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
776
Dan
Dan

Similar threads

littlespark
  • Question
Fire alarm panel. Don’t recognise fault code
Thanks. I do a lot more for the site than just change a few alarm batterys. EICRs, PAT, numerous little jobs. Never away from the place.
2
Replies
19
Views
2K
littlespark
littlespark
C
My alarm panel is going into alarm when entering the premises
hi yes i agree its a final pir circuit with 30 seconds entry and exit programmed in no other detectors on route to rkp tried a different...
2
Replies
16
Views
505
Pauly24
P

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top