hi am after some help with fitting a nest gen 3 to this boiler its a worcester danesmoor utility 15/19 oil boiler, this is the wiring behind the inbuilt programer. Thank you
![[ElectriciansForums.net] Help with thermostat](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/36/36305-3abf78d4a37b35977fbead9036455f27.jpg "[ElectriciansForums.net] Help with thermostat")
![[ElectriciansForums.net] Help with thermostat](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/36/36306-60ad0fabfedf9e6fcd5da3febb8b8bd0.jpg "[ElectriciansForums.net] Help with thermostat")
-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
- Thread starter Dan Mabbott
- Start date
- Replies 7
- Views 2K
-
- Tags
- thermostat
Discuss Help with thermostat in the Central Heating Systems area at ElectriciansForums.net
It looks very straight forward, what exactly are you having difficulty with?
OP
Next??? Not sure where you got that. Am after help on where each wire goes from the nest heat link to the boiler control pcb thank you
we are not hear to give you step by step guide on doing the job .ring up nest .before you do any damage to the boiler and your self .
dumb ,think before press the button .
dumb ,think before press the button .
OP
Thank you not thank you, got sorted by helpful guy who sent me a private message
me don't think so .we have a lot of people asking how to fit nest .so you might not get a lot of joy on this forum .
OP
Well its sorted now so dont worry
Thread closed as OP has now sorted it. @buzzlightyear ive had to delete a few of your posts on a few threads this evening....if you can’t/don’t want to help then move on to another thread where you can add some substance rather than dragging the thread down. Thanks Lee
Last edited:
Reply to Help with thermostat in the Central Heating Systems area at ElectriciansForums.net
Similar Threads
As a "temporary" measure I went down a slightly different route.
Nothing off the shelf appealed. In particular I wanted something with a good WAF...
- EricMark
- Central Heating Systems
- 7
- 1K
The point is that you set up a schedule of what temperature you want at what time and the nest brings the heating on at the right time to achieve...
- leccylen
- Central Heating Systems
- 9
- 2K
Not just any radiator though, it should only be the radiator in the room where the thermostat for each zone is located which doesn't have a TRV.
- Poppysdad
- Central Heating Systems
- 10
- 1K
Ignore the post in #3 it is of no help. Hopefully someone may know but it maybe a longshot, have you asked on a more specific appliances forum?
- botty67
- Electrical Appliances Forum
- 2
- 334
- Question
It's the policy on this forum not to give step by step advice.
If you have an understanding of wiring requirements you will not have any...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
speed controlDimmers are designed for resistive loads, your motor is an inductive load.- Latest: mainline
-
375kw squirrel cage 415v motor starting issuesYeah when we start up the cone crusher the power factor can drop from .9 to .5. I’ve seen it...
- Latest: Thomas_h
-
What’s the most efficient way to angle solar panels for DIY projects?This question is aimed at DIY enthusiasts working on solar projects who want to optimize the...- Latest: anitahooda
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.