Hi, a little clarity required please.
I’ve recently been to a property to make an emergency repair to a broken cable ( they drilled through it). I’ve patched the cable for the moment but while I was looking at the bonding I found the CH pipes bonded next to the incomer but not the incomer itself. The board doesn’t appear to have earth bond for water either, gas is present and correct. The incomer is copper then it goes to pvc then back to copper. It’s some distance from the CU unfortunately.
Since I spoke to them they got another electrician round and plumber for a second opinion and both say the bonding is acceptable. Am I missing something here? I mainly do commercial stuff and rarely domestic.The house is 1960’s in age.![[ElectriciansForums.net] EP Bonding Copper pvc copper](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/37/37004-5299ba74e5d817b5f3d98289029a544d.jpg "[ElectriciansForums.net] EP Bonding Copper pvc copper")
I’ve recently been to a property to make an emergency repair to a broken cable ( they drilled through it). I’ve patched the cable for the moment but while I was looking at the bonding I found the CH pipes bonded next to the incomer but not the incomer itself. The board doesn’t appear to have earth bond for water either, gas is present and correct. The incomer is copper then it goes to pvc then back to copper. It’s some distance from the CU unfortunately.
Since I spoke to them they got another electrician round and plumber for a second opinion and both say the bonding is acceptable. Am I missing something here? I mainly do commercial stuff and rarely domestic.The house is 1960’s in age.
