Anybody make a 3 phase oblong board ?

sinewove · Dec 15, 2018

As above,I do work for a fabricator of hot food counters and they need a 3ph db to fit in a cupboard about 500wide x 300high.I have found a proteus unit,but would prefere another brand.In the past a din rail box has been used with mcb,s hard wired to a main switch,but I believe there is no warranty with such a unit.Thanks for any help.
Sw.

Leesparkykent · Dec 15, 2018

The only type A TPN board I’m aware off is the Proteus one you’ve mentioned. I’ve used them a few times and they aren’t that bad really.

andyb · Dec 15, 2018

Hager do the enclosure, you just need to populate it with a tp incommer, tp busbar, links etc.

Technical Properties VE110U - https://www.hager.co.uk/product-catalogue/energy-distribution/enclosures/vector-ii-weather-proof/vector-ii-enclosures/ve110u/42276.htm

Andy78 · Dec 15, 2018

I'm sure Schneider do a TP single row solution.

Sintra · Dec 15, 2018

[ElectriciansForums.net] Anybody make a 3 phase oblong board ?

Yes Schneider do them. Although this picture is of a 3 row DB it will give you an idea of its appearance.

sinewove · Dec 16, 2018

Thanks for all the help,will look into schneider and hager units.
regards,Sw

richy3333 · Dec 16, 2018

I'd go Proteus also. If they don't have one off the shelf that will fit they can manufacturer for you (made in England). No idea on cost tho

DefyG · Dec 24, 2018

Had a similar enquiry recently and opted for the Hagar unit (Good board, easy to work on , 'fit for purpose'), but wasn't aware Schneider made one though as may have opted for that (depending upon the cost as probably double that of the Hagar when fully loaded!).