Anybody make a 3 phase oblong board ?

[sinewove]

As above,I do work for a fabricator of hot food counters and they need a 3ph db to fit in a cupboard about 500wide x 300high.I have found a proteus unit,but would prefere another brand.In the past a din rail box has been used with mcb,s hard wired to a main switch,but I believe there is no warranty with such a unit.Thanks for any help.
Sw.

 

[Leesparkykent]

The only type A TPN board I’m aware off is the Proteus one you’ve mentioned. I’ve used them a few times and they aren’t that bad really.

 

[andyb]

Hager do the enclosure, you just need to populate it with a tp incommer, tp busbar, links etc.

Technical Properties VE110U - https://www.hager.co.uk/product-catalogue/energy-distribution/enclosures/vector-ii-weather-proof/vector-ii-enclosures/ve110u/42276.htm

 

[Andy78]

I'm sure Schneider do a TP single row solution.

 

[Sintra]

Yes Schneider do them. Although this picture is of a 3 row DB it will give you an idea of its appearance.

 

[sinewove]

Thanks for all the help,will look into schneider and hager units.
regards,Sw

 

[richy3333]

I'd go Proteus also. If they don't have one off the shelf that will fit they can manufacturer for you (made in England). No idea on cost tho

 

[DefyG]

Had a similar enquiry recently and opted for the Hagar unit (Good board, easy to work on , 'fit for purpose'), but wasn't aware Schneider made one though as may have opted for that (depending upon the cost as probably double that of the Hagar when fully loaded!).