2 gang light switch to a smart light switch | on ElectriciansForums

Discuss 2 gang light switch to a smart light switch in the Lighting Forum area at ElectriciansForums.net

Tooter

DIY
Joined
Sep 28, 2019
Messages
8
Reaction score
3
Location
Yorkshire
Hi looking for some advice if poss. Recently I purchased a smart switch to replace on in my man cave and I'm a little stuck on how to wire it up. It controls 2 lights no 2 way switching. I have attached 2 pics one of my existing switch and one of my smart switch all input is appreciated thanks.[ElectriciansForums.net] 2 gang light switch to a smart light switch[ElectriciansForums.net] 2 gang light switch to a smart light switch
 
If there are no other wires in your switch back box which maybe a neutral then no. Try Googling no neutral smart switch they are available.
 
Hi looking for some advice if poss. Recently I purchased a smart switch to replace on in my man cave and I'm a little stuck on how to wire it up. It controls 2 lights no 2 way switching. I have attached 2 pics one of my existing switch and one of my smart switch all input is appreciated thanks.View attachment 52698View attachment 52699
Think you will find that your smart switch will require a Neutral to ensure it will work.
 
Lightwaverf doesn’t require a neutral to work...
works through app, if you get their hub interface or with a handheld remote control.

The lack of neutral is one issue, another, it appears you have 2 feeds.
 
Hi sorry to keep thrashing this thred. If I was to run a neutral cable from the ceiling rose to the switch then ran both commons to the Lin on the smart switch would this still be safe and up to regs?.
 
I was actually thinking along those lines. If both switches are on the same circuit you could repurpose one wire as a neutral.
 
Hi just wanted to thanks everyone who posted replays to my question I fired my switch last night doing exactly as instructed marking the cable with blue shrink wrap and swapping it to the neutral and it works great. Thanks again.
 
Hi all

I have problem change my old 2gang 2 way switch to smart switch . If someone can help, will be great for me :D
Please see pictures
White L1 and 2 brown in com are live when light is off
 

Attachments

  • [ElectriciansForums.net] 2 gang light switch to a smart light switch
    old switch.jpg
    57.5 KB · Views: 8
  • [ElectriciansForums.net] 2 gang light switch to a smart light switch
    smart switch.jpg
    42.9 KB · Views: 8

Reply to 2 gang light switch to a smart light switch in the Lighting Forum area at ElectriciansForums.net

Similar Threads

Neutral and live
Replies
2
Views
242
Hi all, I've been at this all night for a smart switch I've installed for exterior lighting for the house located in the eve's of the house attic...
Replies
0
Views
167
Yes I understand the setup now. Sorry about my confusing first post 🫢 It might be worth buying the Livolo switches you identified and lash at...
Replies
7
Views
1K
My guess from that last picture is the whoever installed it has drawn two 6242Y’s instead of a single 6243Y for the 2way side of that two gang...
Replies
9
Views
899
Only thing is, its not 2 way
Replies
4
Views
938

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks