What Crabtree type RCBO fits this board? | Page 2 | on ElectriciansForums

Discuss What Crabtree type RCBO fits this board? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Jun 4, 2019
Messages
7
Reaction score
3
Location
L/Spa
[ElectriciansForums.net] What Crabtree type RCBO fits this board?

Hello guys, completely forgot to remove the board cover to check what type of rcbo was required for this particular Crabtree board. Anyone from experience know which type RCBO fits?

thanks in advance!!
 
Polestar is one DIN module wide = 17.5mm
The width of a DIN rail mounted device is standardised (maybe multiples of 0.5 module), as is the height of the bit that projects through the panel, and the positioning of that bit relative to the DIN rail.
All other dimensions, such as the depth of the device, the depth of the bit that projects through the panel, the height of the device, and the positioning of the in and out terminals is definitely and most unhelpfully, not standardised.
 
Last edited:
Bored this evening, so dug through my box of bits and found both - pretty sure it's a Starbreaker (The one I have is actually one of the late 3871 Type Bs)

[ElectriciansForums.net] What Crabtree type RCBO fits this board?

Side by Side with a modern Starbreaker

[ElectriciansForums.net] What Crabtree type RCBO fits this board? [ElectriciansForums.net] What Crabtree type RCBO fits this board?

[ElectriciansForums.net] What Crabtree type RCBO fits this board?

So I presume a modern SB RCBO will fit without any problem.

If only other manufacturers cough Wylex were so careful about insuring compatibility over such a long period.
 

Reply to What Crabtree type RCBO fits this board? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
228
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
687
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
644

Similar threads

  • Question
What I find a little bit interesting is that there was an era of MFT's e.g. Robin, early Kewtech that tried to do non-trip loop tests using D-Lok...
Replies
5
Views
1K
If two tariffs are sufficient, and you don't need too many ways, you can easily add an SPD kit to the Fusebox F2014DT dual tariff board. The only...
Replies
1
Views
295

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top