How to use Memera 2000 program planner

tonysc · Dec 4, 2021

Hi Everyone,

Hope you are well.

I've just moved into a flat. It has got economy 7(duel electricity tariff) floor heating/boiler. The mains switch is Memera 2000 and it has got a program planner as attached. Do you guys know how to configure the program planner so it switches on only at off-peak hours?

Much Appreciated & Kind Regards

Tony

[ElectriciansForums.net] How to use Memera 2000 program planner

Avo Mk8 · Dec 4, 2021

Nobody?
It seems the timer made for that CU is a MEM AT1P or AT2P
Unfortunately so far I haven't found any instructions for it on the web

The same question was asked here in 2014 with a rather unhelpful response/outcome:

digital timer instructions for mem at1p | on ElectriciansForums

Find digital timer instructions for mem at1p Advice and Help. How-to digital timer instructions for mem at1p in the UK Electrical Forum advice boards on ElectriciansForums.net | Free Electrical Advice - Electricians Forums: Electricians' Talk Forums. digital timer instructions for mem at1p...

www.electriciansforums.net

It's listed in the Memera old catalogue on the web, but the AT2P looks different to yours, so perhaps it's an AT1P.

I guess as a last resort it's a question of pushing buttons and seeing if you can work it out

brianmoooore · Dec 5, 2021

I recognise the pic as being very similar to one I had in use a few years back, that I'd also installed to control storage heaters in a property on a sub main. Storage heaters and timeswitch are now long gone.
From what I remember, it wasn't the easiest thing to program, but did respond to button pushing and a bit of logic.
Is this a rented property? If so, I see another problem if a conscientious EICR is ever carried out.
There's a big hole into the inside of that consumer unit