Tool for 45 and 90 Degree Cuts on PVC Trunking

RDB85 · Dec 29, 2021

I have bought a Mini Mitre Block for some Trunking as the cutters I have are better for Mini Trunking. I’m just looking for something that will allow me to mark the angle before cutting it. I was thinking either a Tri-Square or Trend ANGLEFIX. I then also need some advice on a file to smooth the edges down.

Any advice would be great.

timhoward · Dec 29, 2021

I actually use a chop saw, cowboy that I am. A cheap screwfix one is fine and just get a finer toothed blade for it. I’m expecting abuse for admitting this but it works for me!

RDB85 · Dec 29, 2021

timhoward said:
I actually use a chop saw, cowboy that I am. A cheap screwfix one is fine and just get a finer toothed blade for it. I’m expecting abuse for admitting this but it works for me!

I would love one. Just out of my budget unfortunately.

nicebutdim · Dec 29, 2021

Plastic trunking is best 'filed' with the edge of a knife

RDB85 · Dec 29, 2021

nicebutdim said:
Plastic trunking is best 'filed' with the edge of a knife

Oh right. I don’t think I would trust myself, hence why I was asking about a file.

mattg4321 · Dec 29, 2021

Mitre box or chop saw for me.

nicebutdim · Dec 29, 2021

RDB85 said:
Oh right. I don’t think I would trust myself, hence why I was asking about a file.

Back of an old hacksaw blade would do just as well.

RDB85 · Dec 29, 2021

nicebutdim said:
Back of an old hacksaw blade would do just as well.

Thanks I will give that a try. Any mitre box recommendations before I order a cheap one and regret it.

nicebutdim · Dec 29, 2021

RDB85 said:
Thanks I will give that a try. Any mitre box recommendations before I order a cheap one and regret it.

Not suggesting they don't exist, but I'm yet to meet a mitre box I'd recommend.

RDB85 · Dec 29, 2021

Would this be okay: Hultafors V20P 20cm Professional Try Square https://www.amazon.co.uk/dp/B004ZFE...abc_XJWG15XS9C0924YFTQ3H?_encoding=UTF8&psc=1

Or

Hultafors - Metric Rafter Square 18cm https://www.amazon.co.uk/dp/B089RW7HNF/ref=cm_sw_r_cp_api_glt_fabc_K5M9TS9PRZ02CH7VBFX0

nicebutdim · Dec 29, 2021

A square is a square, provided it's actually square, and will give you 90 or 45 degree angles.

RDB85 · Dec 29, 2021

nicebutdim said:
A square is a square, provided it's actually square, and will give you 90 or 45 degree angles.

That’s the problem some of the comments say they are fine. Others not so much.

Jim_e_Jib · Dec 29, 2021

RDB85 said:
That’s the problem some of the comments say they are fine. Others not so much.

If you are doing ultra fine woodwork then you'll probably notice if a square is fractionally out.

If you're chopping some plastic trunking, I wouldn't sweat it too much. Your technique with the saw will have a bigger impact on the final result than your set square being a quarter of a degree out.

Pick something reasonably priced from a brand you know and you'll be good to go. Don't overthink it.

RDB85 · Dec 30, 2021

I think something such as this will do the job:

TREND DAR200 Digital Angle Rule, 20cm https://www.amazon.co.uk/dp/B003NKALBC/ref=cm_sw_r_cp_api_glt_fabc_2VQKA5NK24FR23ZXQ6MW

loz2754 · Dec 30, 2021

Rolson 50858 Combination Square, 300 mm https://www.amazon.co.uk/dp/B004ST3ULA/ref=cm_sw_r_apan_glt_fabc_HQEF7NZK65JGYXG034V0

Mike Johnson · Dec 30, 2021

I used to use one of these: https://www.amazon.co.uk/Shears-Tru...able-Including/dp/B07SFTHVBV/ref=sr_1_2_sspa?

nicebutdim · Dec 30, 2021

I use a combination square from Screwfix that cost a fiver - freehand steel trunking cuts with grinder all butt neatly, so it must be alright.

telectrix · Dec 30, 2021

years ago, my dad wanted a mitre block. he made one from some scrap timber, similar to this:

[ElectriciansForums.net] Tool for 45 and 90 Degree Cuts on PVC Trunking

Dustydazzler · Dec 30, 2021

If I had a job that required a lot of trunking to be cut then I might be tempted to buy a cheap chop saw...

https://www.NoLinkingToThis/p/titan...=4583451660521506&utm_content=S - Power Tools

But for a one off cut then a cheapo hacksaw and mitre box is fine

RDB85 · Dec 30, 2021

Dustydazzler said:
If I had a job that required a lot of trunking to be cut then I might be tempted to buy a cheap chop saw...

https://www.NoLinkingToThis/p/titan...=4583451660521506&utm_content=S - Power Tools

But for a one off cut then a cheapo hacksaw and mitre box is fine

That does look okay to be honest. I am looking to buy this one:

https://www.NoLinkingToThis/p/evolu...lti-material-sliding-mitre-saw-220-240v/2965v

Mike Johnson · Dec 30, 2021

When buying a chop saw a main consideration is the adjustability of the fence and if it mitres on both sides of 90 deg, real pain if only on one side.

RDB85 · Dec 30, 2021

Mike Johnson said:
When buying a chop saw a main consideration is the adjustability of the fence and if it mitres on both sides of 90 deg, real pain if only on one side.

I’ve never had one or even used one. I think it’s a tool that you would use more than you think.

Dustydazzler · Dec 30, 2021

Mike Johnson said:
When buying a chop saw a main consideration is the adjustability of the fence and if it mitres on both sides of 90 deg, real pain if only on one side.

If it only cuts one way then you will need to wire in circles

Dustydazzler · Dec 30, 2021

RDB85 said:
I’ve never had one or even used one. I think it’s a tool that you would use more than you think.

If you have lots of trunking to cut then a chop saw is great , I have one I used when I laid all my laminate at home it was so easy and cuts straight every time

RDB85 · Dec 30, 2021

What would you go for the Titan one or the Evolution? Is it worth the extra?

-

-

-

nicebutdim

-

-

nicebutdim

-

nicebutdim

-

nicebutdim

-

-

-

loz2754

-

nicebutdim

-

-

-

-

-

-

-

-

Similar Threads

Electricians Tools | Electrical Tools and Products

OFFICIAL SPONSORS