If you were wiring 8 gangs of 2 way light switches. Would you wire 8 independent circuits, so 8 no. 3 core between switches. Or would you run a live, and loop all the L1's together, then just run 8 no. 2 core between switches ?
Discuss 8 gangs of 2 way light switches - wiring in the UK Electrical Forum area at ElectriciansForums.net
My advice is just buy a single one instead of a box as it maybe confusing.Might be best to stick with something better suited to my abilities.
That’s banging, I’ve just seen Timpsons do engraving. I’m gonna see what they can do.I had a go at engraving an MK Grid+ switch rocker:
View attachment 98833
Why bother, just send it to FreddoThat’s banging, I’ve just seen Timpsons do engraving. I’m gonna see what they can do.
Traffolyte.Seen plenty mistakes when other apprentices tried engraving… Tumble dryer/drier or just having “FF” for fridge freezer.
The engraved letters on white plastic was rubbed over with coloured wax…. (A professional crayon) and the coloured bit stayed inside the cut away part.
We also made plastic signs that were made up of plates of laminated coloured plastic. So the engraved part would cut through the top layer revealing whatever the second layer colour was.
The most common mistake with manual engraving is forgetting to lift the stylus when moving to the next letter!Seen plenty mistakes when other apprentices tried engraving…
If you have no luck your end I'll do it.Why bother, just send it to Freddo
Traffolyte.
Don't forget my commissionIf you have no luck your end I'll do it.
Is that Mach3 / 4 by Artsoft?The largest cost is the licences for the CAD software and the MACH software to run the machine.
Mach 3. I use Vectric Cut 2D Desktop for making up signs and plates as it will engrave simple text to traffolyte and cut out fixing holes and panel button holes and the plate itself. And Stickfont V2.6 for engraving text on switches and things as it is substantially more flexible for text. Was making these ready for this week splitting offices to 3 separate suppliers meters.Is that Mach3 / 4 by Artsoft?
What CAD software do you use?
Makes my Dymo look very inadequateMach 3. I use Vectric Cut 2D Desktop for making up signs and plates as it will engrave simple text to traffolyte and cut out fixing holes and panel button holes and the plate itself. And Stickfont V2.6 for engraving text on switches and things as it is substantially more flexible for text. Was making these ready for this week splitting offices to 3 separate suppliers meters.
View attachment 98835
Makes my masking tape and sharpie pen look very inadequateMakes my Dymo look very inadequate
I only usually bother on posher jobs with nice clients or more heavy industrial work where clear durable labels are more important.
Yes, saves having to draw up designs with measurements etc., send the designs away and then wait for them to be made and delivered. Don't have to worry about minimum order charges and such either.For the latter, it must be nice being able to print your own.
Cricked my neck now.It even make my Brother PT550 look a bit sad, but I am happy with it, better than a Sharpie by a long way, reminds me must make a sticker to go over the Wylex Logo. View attachment 98840
Something that's intriguing meIt even make my Brother PT550 look a bit sad, but I am happy with it, better than a Sharpie by a long way, reminds me must make a sticker to go over the Wylex Logo. View attachment 98840
Reply to 8 gangs of 2 way light switches - wiring in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.