L+G 3ph Meter Error Codes | on ElectriciansForums

L+G 3ph Meter Error Codes

Discuss L+G 3ph Meter Error Codes in the Commercial Electrical Advice area at ElectriciansForums.net

S

Stoner27

Joined
Oct 13, 2022
Messages
15
Reaction score
2
Location
Calne
Hi, L+G ZMD120A53 is displaying FO40000. I have searched the net and contacted L+G who refused to assist.

Been waiting 6 months for supplier to repond.

What does FO40000 indicate?

Help please.
 
The fault will be an internal issue with the meter, like failed comms or unknown command., there will be nothing you could do about it if you knew what the fault code indicated.
It's most likely the meter would be replaced.

The Meter model number doesn't bring anything up on searching, do you have a photo of it including any numbers on it?

Also are you being billed by the supply for energy use?

Typically meters are owned by a third party company and sometimes installed and maintained by yet another company other than the supplier.
The energy supplier will lease the meter.

Have you complained to OFGEM about the lack of response from your supplier?
 
Hi
snowhead said:
The fault will be an internal issue with the meter, like failed comms or unknown command., there will be nothing you could do about it if you knew what the fault code indicated.
It's most likely the meter would be replaced.

The Meter model number doesn't bring anything up on searching, do you have a photo of it including any numbers on it?

Also are you being billed by the supply for energy use?

Typically meters are owned by a third party company and sometimes installed and maintained by yet another company other than the supplier.
The energy supplier will lease the meter.

Have you complained to OFGEM about the lack of response from your supplier?
Click to expand...
Hi Snowhead, our bills have gone up 1200%. The Ombudsman has ruled in my favour regarding EON's handling or lack of it, but now we need to address the meter error. Knowing what the Error code means might help our case. Its dated 2004[ElectriciansForums.net] L+G 3ph Meter Error Codes
[ElectriciansForums.net] L+G 3ph Meter Error Codes
 
Found this - (sorry two out of sequence pages pasted below)
Click the thumbnails to read them!

🥇 ProtectedPool ➤ Most Powerful and Safest Web3 Smart DeFi Wallet 🔐

🥇 ProtectedPool ➤ Web3 Smart DeFi Wallet 🔐 . Your New DeFi Experience:: 🔐 Secure, Smart, Simple. Double Approvals. Add extra confirmation of any transaction with 2FA solutions including Google Authenticator or hardware security keys. Self-custodial Solutions. Protected Pool is built on smart...
docplayer.net docplayer.net

[ElectriciansForums.net] L+G 3ph Meter Error Codes[ElectriciansForums.net] L+G 3ph Meter Error Codes[ElectriciansForums.net] L+G 3ph Meter Error Codes
 
Last edited:
Avo Mk8 said:
Found this - (sorry two out of sequence pages pasted below)
Click the thumbnails to read them!

🥇 ProtectedPool ➤ Most Powerful and Safest Web3 Smart DeFi Wallet 🔐

🥇 ProtectedPool ➤ Web3 Smart DeFi Wallet 🔐 . Your New DeFi Experience:: 🔐 Secure, Smart, Simple. Double Approvals. Add extra confirmation of any transaction with 2FA solutions including Google Authenticator or hardware security keys. Self-custodial Solutions. Protected Pool is built on smart...
docplayer.net docplayer.net

View attachment 106723View attachment 106724View attachment 106725
Click to expand...

Looks like that fault would probably tie up with the incorrect readings then.
 
Stoner27 said:
Does it matter that mine is 120A and this is 120AP?
Click to expand...
I don't know! It probably does if you are planning going to a court of law!
The manual is dated 2001. Your meter is 2004. I think it's likely the structure and meaning of fault codes would remain consistent during continuing development of the product over 3 or 4 years. In your position I would assert that the L&G documentation indicates the fault code displayed indicates a failure in the meters measuring system, and see where this gets you!
 
Avo Mk8 said:
I don't know! It probably does if you are planning going to a court of law!
The manual is dated 2001. Your meter is 2004. I think it's likely the structure and meaning of fault codes would remain consistent during continuing development of the product over 3 or 4 years. In your position I would assert that the L&G documentation indicates the fault code displayed indicates a failure in the meters measuring system, and see where this gets you!
Click to expand...
Will do. Thanks
 
The ZxD120AP meter doesn't use the first 2 digits of the display for faults, so the DFS fault is wrong,.

The error FF 04 00 00 00 indicates a clock fault from self test, it could mean there is a failure of the internal clock so any timed Tariffs could be wrongly recorded.
However in all the L&G documentation I've seen online they always say if errors are displayed remove the meter and return to a service centre.

[ElectriciansForums.net] L+G 3ph Meter Error Codes
 
snowhead said:
The ZxD120AP meter doesn't use the first 2 digits of the display for faults, so the DFS fault is wrong,.

The error FF 04 00 00 00 indicates a clock fault from self test, it could mean there is a failure of the internal clock so any timed Tariffs could be wrongly recorded.
However in all the L&G documentation I've seen online they always say if errors are displayed remove the meter and return to a service centre.

View attachment 106733
Click to expand...
Thanks. But my display does not follow that format, there is only 1 F and no space between F an 1st 0. Must be a difference between 120Aser53 and 120AP??? 7 digits not 10.
[ElectriciansForums.net] L+G 3ph Meter Error Codes
 
Last edited:
I did come across the manual showing the larger number of display fields, but didn't consider it was necessarily correct for the ZMD120ASer53 model.

I noticed there is a meter selling on eBay with a similar, but different ('Ser' is 'Ptr') model no here:
www.ebay.co.uk

COMPTEUR ELECTRIQUE SIEMENS LANDIS+GYR DIALOG ZMD120APtr53 | eBay

Find many great new & used options and get the best deals for COMPTEUR ELECTRIQUE SIEMENS LANDIS+GYR DIALOG ZMD120APtr53 at the best online prices at eBay! Free delivery for many products.
www.ebay.co.uk
interestingly the seller pastes a link to the manual in his listing, the same as the one in my post #4 !
 
As an eBay Associate we earn from qualifying purchases.

Reply to L+G 3ph Meter Error Codes in the Commercial Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

PCBWay
  • Article
Meet PCBWay at electronica A1.163
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
183
PCBWay
PCBWay
Electrical2go
  • Sticky
  • Article
📢 Best Sellers Catalogue Now Available! 📢
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
560
Bob Labla
B
Dan
  • Article
The Official Sponsors of ElectriciansForums - There are currently 8
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
516
Dan
Dan

Similar threads

B
Problems with off-peak circuit on Economy 7 - any help appreciated!
yeah that's defn not ideal
Replies
5
Views
2K
BenCos18
BenCos18
S
  • Question
Help need some advice on Economy 7 meter
It sounds like the original meter was reading incorrectly and octopus aren't keen to admit this as they would probably have to refund you. I...
Replies
1
Views
1K
davesparks
D

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top