Electrician's Notes | on ElectriciansForums

Discuss Electrician's Notes in the Electrical Tools and Products area at ElectriciansForums.net

D

Devon Sparky

Hi, I posted a thread a while ago looking for guide to keep in the toolbox. I wanted something that had a decent amount of info but something that was more concise, and less vulnerable to damage, than the OSG. There's not much on the market to fit the bill but the one I did find is really useful. You can see it on you tube at Electrician's Notes by dott solutions - YouTube I've only had mine a week but I think it's a real time saver and something I thought was worth sharing. Cheers.
 
I keep a complete set of NICEIC pocket guides in the van (normally pick up a set every year at Elex). They are pretty hard wearing, and you can also show them to the customer to clarify a point.
 
The only reason why I keep them in my tool box, is because there is normally room to fit a few books and guides. :willy_nilly:

[ElectriciansForums.net] Electrician's Notes
 
Interesting to read the last couple of replies and in answer: I tried the NIEIEC pocket notes but to be honest, by the time I'd collected the useful info I wanted to carry around with me, I found them just as bulky and un-user friendly as the OSG. And to answer, what's the point - I like to carry around a bit of info in the end pocket of my toolbox and this has proved useful twice just this week. While working at a customer's house (that was up to date with a Schedule of Test Results!) the customer wanted to change 16 ELV down lighters for LEDs. I know, like most will that the Zs should be less than 6.14 but for the LEDs I'd need a C-rated breaker. The choice was back to the van for a fumble through the OSG and a calculator to work out the 80% figure or just read it from the new book I'd bought that was in the toolbox? Same customer wanted to know why I wouldn't fit her 'bathroom' light she'd bought from a DIY store over her shower. I could show her the zone chart in the Electrician's Notes and she was happy. The booklet won't be everyone's cup of tea but having tried it, I'm quite a fan.
 
Interesting to read the last couple of replies and in answer: I tried the NIEIEC pocket notes but to be honest, by the time I'd collected the useful info I wanted to carry around with me, I found them just as bulky and un-user friendly as the OSG. And to answer, what's the point - I like to carry around a bit of info in the end pocket of my toolbox and this has proved useful twice just this week. While working at a customer's house (that was up to date with a Schedule of Test Results!) the customer wanted to change 16 ELV down lighters for LEDs. I know, like most will that the Zs should be less than 6.14 but for the LEDs I'd need a C-rated breaker. The choice was back to the van for a fumble through the OSG and a calculator to work out the 80% figure or just read it from the new book I'd bought that was in the toolbox? Same customer wanted to know why I wouldn't fit her 'bathroom' light she'd bought from a DIY store over her shower. I could show her the zone chart in the Electrician's Notes and she was happy. The booklet won't be everyone's cup of tea but having tried it, I'm quite a fan.
The osg values are 80% already
 
The only problem is my nephew keeps trying to pinch them every time he visits. Trouble is, how can you tell him it’s dangerous to play with Tommy tape measure and Sally screwdriver!!!
 
The only problem is my nephew keeps trying to pinch them every time he visits. Trouble is, how can you tell him it’s dangerous to play with Tommy tape measure and Sally screwdriver!!!
Last time i was on site a stinking plumber tried to borrow Tommy tape so i stabbed him with Sally screwdriver :D
 
Can anyone comment on the Amicus guides? I've not used them myself but I hear they're supposed to be worth the money.

I think the Amicus guides have now gone and been replaced by Unite Guides. They are good but not for the same purpose. The Electrician's Notes are good on site or handy to have when filling in the paperwork. The Unite Guides are more like a revision tool for passing exams or refreshing your regs knowledge.
 
Interesting to read the last couple of replies and in answer: I tried the NIEIEC pocket notes but to be honest, by the time I'd collected the useful info I wanted to carry around with me, I found them just as bulky and un-user friendly as the OSG. And to answer, what's the point - I like to carry around a bit of info in the end pocket of my toolbox and this has proved useful twice just this week. While working at a customer's house (that was up to date with a Schedule of Test Results!) the customer wanted to change 16 ELV down lighters for LEDs. I know, like most will that the Zs should be less than 6.14 but for the LEDs I'd need a C-rated breaker. The choice was back to the van for a fumble through the OSG and a calculator to work out the 80% figure or just read it from the new book I'd bought that was in the toolbox? Same customer wanted to know why I wouldn't fit her 'bathroom' light she'd bought from a DIY store over her shower. I could show her the zone chart in the Electrician's Notes and she was happy. The booklet won't be everyone's cup of tea but having tried it, I'm quite a fan.

I can sort of see your point but I have to admit I have never had anyone question me when I quote things like zones to them off the top of my head.
My phone has a calculator so 230/(6*10)*0.8 isn't a difficult sum. Plus doing it on a calculator in front the customer makes them think I know what I am doing..... ;)
 

Reply to Electrician's Notes in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
259
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
744
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
738

Similar threads

Switch by the door, pendant holder and a 100W bulb, some will remember, others weren't born yet when it went out of fashion, but this was the...
    • Like
Replies
0
Views
307
I own a top floor tenement flat that I used to live in and then rented out after I married. It is currently empty whilst some work is being done...
Replies
0
Views
571

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top