Worst place you've seen a fuseboard / consumer unit..?? | Page 2 | on ElectriciansForums
Guest viewing is limited

Discuss Worst place you've seen a fuseboard / consumer unit..?? in the UK Electrical Forum area at ElectriciansForums.net

S

sparkyjohn1

Was round a job over the weekend,, asked the customer where the consumer unit was,,,,, led me to the cupboard under the stairs, not really a surprise.... but wasn't expecting this,, !! Lol...!!

Worst I've ever seen,,, !!! Although, it's an old Re-wirable Wylex, probably there before the toilet was put in,, so not really the sparkies fault... Plumber should have known better.!! Still worth a chuckle tho...//.

Brings a whole new meaning to locating a C/U in an accessible place.... hmm,,






[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??
 
Best Ive seen was a house that had had a new kitchen fitted, in the corner unit, right at the back, was a small (maybe a foot by a foot) bit cut out of the back plate, still not obvious, but if one crawled into the kitchen cabinet, and shined a torch in the hatch and sideways, one would see a number of KMFs and a couple of off peak boards about 3 feet away on a wall.

completely inaccessable and out of reach.
was doing an EICR so wrote it up and walked off laughing wiping the tears away


Kitchen fitters are a law to themselves,,
 
These two were fairly annoying both at the back corner of kitchen cabinets, the one on the right was right beside the sink and you had to remove the fridge to get to it.
[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??
Another one was behind a sliding drawer in a kitchen and another one had had the kitchen built over it, not too badly but enough so you could not get to the neutral bar, the fixed cupboard came down over it and there was only two inches in front of it, the EICR took a long time!
 
I'm sure I have seen a pic on the forum before of one fitted inside a shower cubicle, or was it a service head ?

Anyway, a good one I have seen was on a mate's job I helped him on. The CU, fuse, and meters were in an alcove, similar to what you find at the side of a chimney breast. That alcove got a kitchen build in front of it, boarded and plastered, units and worktop put across it.
Easy enough to get to it all though in an emergency. Just empty all the stuff out the cupboard and unscrew the back panel. My mate had to crawl in there to do all the through connections for the CU relocation. He gets into some spaces for a tubby one.

[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??
 
I'm sure I have seen a pic on the forum before of one fitted inside a shower cubicle, or was it a service head ?

Anyway, a good one I have seen was on a mate's job I helped him on. The CU, fuse, and meters were in an alcove, similar to what you find at the side of a chimney breast. That alcove got a kitchen build in front of it, boarded and plastered, units and worktop put across it.
Easy enough to get to it all though in an emergency. Just empty all the stuff out the cupboard and unscrew the back panel. My mate had to crawl in there to do all the through connections for the CU relocation. He gets into some spaces for a tubby one.

View attachment 24596View attachment 24597View attachment 24598

Crikey Andy, the 2nd picture looks like your mate doesn't have a head!
 
Kwik Save supermarket in cheetham hill,racking right up to the db and no way to isolate it,a broken socket on the aluminium door frame where they plugged in the kiddie ride,had to change the front plate and backbox with the juice on.manager was doing his nut,you can't do it live,but you can't leave a broken socket with exposed cables! what?
 
Under the staircase the customer said. After laying on my back to get though a small hatch I could just about get a small screwdriver in to undo the cover. Had to remove the step and the step supports to be able to work on it.
[ElectriciansForums.net] Worst place you've seen a fuseboard / consumer unit..??
 
Was round a job over the weekend,, asked the customer where the consumer unit was,,,,, led me to the cupboard under the stairs, not really a surprise.... but wasn't expecting this,, !! Lol...!!

Worst I've ever seen,,, !!! Although, it's an old Re-wirable Wylex, probably there before the toilet was put in,, so not really the sparkies fault... Plumber should have known better.!! Still worth a chuckle tho...//.

Brings a whole new meaning to locating a C/U in an accessible place.... hmm,,






View attachment 24583
Trying to see the positive in the negative...

I guess if you was called around to do a EICR and had a dickie tummy it might be handy?
 

Reply to Worst place you've seen a fuseboard / consumer unit..?? in the UK Electrical Forum area at ElectriciansForums.net

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top