uksparks
-
Hi,
Anyone know which bell transformer I can get to fit in this board?
![[ElectriciansForums.net] Bell Transformer](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/17/17605-933d16059be466124dd1db55910748ee.jpg "[ElectriciansForums.net] Bell Transformer")
Anyone know which bell transformer I can get to fit in this board?
Discuss Bell Transformer in the UK Electrical Forum area at ElectriciansForums.net
anything that will fit. what's all that grey crap?
OP
uksparks
-
Hmm, I'll perhaps just stick one next to it outside the board.
i see quite a few houses with boards full of insulation.
Funnily enough, I saw one a couple of weeks ago where a shed load of polystyrene beads from the wall filling had gone inside the cu and you could see all the cables were sticky and had reacted with it.
i see quite a few houses with boards full of insulation.
Funnily enough, I saw one a couple of weeks ago where a shed load of polystyrene beads from the wall filling had gone inside the cu and you could see all the cables were sticky and had reacted with it.
...This must be the "excess migration",UKIP are always bangin' on about...:stooge_curly:
I realise its bad practise but perhaps another make would fit as I cant see any Volex din mounted bell transformers.
A few sites state that wylex will fit Volex but i do not know myself, I'm sure someone here will know.
If it does then the following may be an option:
1. Wylex MTS8/1 8V 1 MODULE Usec 8 VOLTS MTS8 BELL TRANSFORMER 8VA OUTPUT | eBay
2. Wylex MTS12/1 Door Bell Transformer 12V | Screwfix.com
A few sites state that wylex will fit Volex but i do not know myself, I'm sure someone here will know.
If it does then the following may be an option:
1. Wylex MTS8/1 8V 1 MODULE Usec 8 VOLTS MTS8 BELL TRANSFORMER 8VA OUTPUT | eBay
2. Wylex MTS12/1 Door Bell Transformer 12V | Screwfix.com
As an eBay Associate we earn from qualifying purchases.
he wants to squeeze a transformer into a CU:
![[ElectriciansForums.net] Bell Transformer](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/17/17610-a17fa4dd251681b7012007d48269bcf1.jpg "[ElectriciansForums.net] Bell Transformer")
OP
uksparks
-
I'm not going to put in in now, I'll just fit one outside as its too tight.
Reply to Bell Transformer in the UK Electrical Forum area at ElectriciansForums.net
Similar threads
- Question
Yes that will do the job - presuming there is a battery in it and it's working Ok!
Turn the rotary knob one click to the V setting as you say...
- Question
Interesting. Sounds unusual since it seems it was very lightly loaded. Not much you can do I suppose other than buy a replacement unit.
Unless...
- OMGneophyte
- UK Electrical Forum
- 7
- 588
Recommended Sponsor News
Quickwire Now Sponsor ElectriciansForums.net
I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!
![[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net](https://www.electriciansforums.net/attachments/970x90_content_banner_cqw-jpg.110414/ "[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net")
@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"
@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"
PCBWay Now Sponsor ElectriciansForums.net!!
I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.
Welcome to the community and thanks for your sponsorship!
![[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!](https://www.electriciansforums.net/attachments/970x90pcb1-jpg.110635/ "[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!")
PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.
![[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!](https://www.electriciansforums.net/attachments/970x90-3pcb-jpg.110636/ "[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!")
Welcome to the community and thanks for your sponsorship!
PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Boat engine electricsWell, been and gone. Battery’s are fine, things light up when they need to, clicking when they...
- Latest: littlespark
-
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.