Makita
Makita
I've used erbauer stuff for years and almost have the full range bought from screw fix only ever had one problem where i broke the gearbox in a...
Not really, Hilti are no better than any other brand they're just stupidly expensive.
As long as you buy the 'pro' range with 18v and decent AH...
- RDB85
- Electrical Tools and Products
- 5
- 2K
Trade rated tools that can take a dual batter are a totally different tool/battery to the mass produced multiple use batteries for domestic use...
hi thanks but no spec on this one it's a few years old but in good condition I will probably just open up and see if I can get any part numbers...
- Highspark24/7
- Electrical Tools and Products
- 3
- 2K
- Question
Super glue works wonders on cuts. Activator smarts a bit though lol
- shanky887614
- UK Electrical Forum
- 11
- 23K
The higher AH batteries have slightly different slots and guides in the top. If you put a 5AH and an older type 3AH battery next to each other you...
- haptism
- Electrical Tools and Products
- 8
- 5K
- Question
Five attohenries? That's a spectacularly low inductance, they must be very tiny! What's their capacity in Ah? :rolleyes:
- HappyHippyDad
- What's the best price you can find for this?
- 4
- 2K
I know but what a drill it was. Mine lasted 8 years before it died. If I could find another one I would buy another one
- Question
We have a old bosch grinder that runs fine on all are gennys and our smaller hammer drills small electric breaker also works fine
I told him...
Trigger was brushless for a while, till he had a new head fitted, or was that a new handle?
- Question
Check out Miles Tools for parts. mtmc.co.uk/spares well good :)
- gazdkw82
- UK Electrical Forum
- 14
- 8K
Obfuscation of location!... you trying to write a new song for Mary Poppings new film?
- Nathan Omar
- Talk Electrician
- 3
- 2K
https://www.screwfix.com/p/erbauer-angled-keyless-chuck-10mm/6746h?_requestid=89655
I had the same problem a while ago bought this out of...
- Tom Christopher
- Electrical Tools and Products
- 13
- 5K
I use red and black, also begins with M, but better gear. ;)
- Question
Take the survey and you could win a drill!
Yep, my Titan cost me £12.50 off eBay and the Henry I've had for 20 years - I'll bet that Tels story is just as cheap!
Looking on the bright side...
- hoppy
- Electrical Tools and Products
- 5
- 2K
If the commutator has a few windings shorted, clean the commutator then undercut the mika using a broken half of a junior hacksaw blade to clear...
Comes under the Abrasive wheels act. Any DIY er can go and purchase a grinder fit the wheel and crack on working with it. If the wheel was not...
Thanks for the responses. My order comes with a MakPac case, but I'm not a great fan of them. I'm going to order that as it is a better...
The last makita drill I had was one of the really long handled jobbies that the battery fitted insured the full length of the grip.
Proper retro...
Don't mind me while I bump some old threads. Just doing the rounds. Ignore the thread if it's not current topic, it'll soon drop off the list, but...
That's more like it. :-)
I could have went makita (very close to doing so)...but recently had my head turned by milwaukee and have their m12 combi drill (Cheers howdens :D...
- Question
I run the makita wall chaser with a Bosch gas 35 m class vac. Must say its the nutts. Had to adapt the hose as they were not compatible but works...
- TJC1
- UK Electrical Forum
- 3
- 2K
my first attempt at eagle and i dont like it very much
i use it to clean everything, it dries quick as well which is a bonus
was that the lct batteries?
its just a plastic tab you cut off then you can put standard lxt batteries in the tool
No way ! The 18v sds hammer drill is awesome !
ill be honest i went from the makita 3speed to 2speed 458 and i dont use the first gear usually. (ill use impact driver instead)
as long as...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is my rewire price in the right area?I couldn't see that you had priced for running a supply from the intake to the 2nd CU upstairs...- Latest: richy3333
-
existing light (four wires) into new Led lightYour right I just had a quick look at the link and assumed it was the maintenance free one ,my bad .
- Latest: Jock from the north
-
My boiler wiring has not gone to plan!McGhee's and Morton's are the go-to breakfast rolls down here in Glasgow, fyi! Tesco stock...- Latest: pirate
5 Popular Electricians Tools Thread
-
Automatic gyroscope laser levelAutomatic Gyroscopic Laser Level Do they all automatically stay level...
- Started by Dan
- Replies: 37
-
UHF wiring helpMorning all, just after some help with some UFH wiring on my job im...
- Started by SparkDownSouth
- Replies: 5
-
Wire Strippershttps://www.amazon.co.uk/s?k=wire+strippers&crid=T5FZCQEYB3NL which...
- Started by Dan
- Replies: 15
-
24 module DB to include 16 MCBsI am looking for a 24 module DB to include isolator, 16 MCBs, 2 RCDs...- Started by vini
- Replies: 17
-
UPS specification for pool pumpsBackground A pool installation uses two single phase pumps to circulate...- Started by SJD
- Replies: 23
Some Popular Threads
-
Song words.I mentioned this a while back as a thread on another forum which has...- Started by westward10
- Replies: 1K
-
Immersion fuse or MCB?An immersion heater 3kW, say off a final ring. A number of points. Is...
- Started by Steve-S
- Replies: 110
-
Unreasonably high invoice bill from an electricianGood afternoon everyone, I am Alex and I'm new here. I am posting this...- Started by AlexanderSmi123
- Replies: 96
-
RCBO installtion in old MCU following EICR ReportHi, I recently had an EICR done at my property which unfortunately was...
- Started by Deanp35
- Replies: 93
-
3 phase problem after spark did 5 year safety inspectionHi lads 5 year safety inspection the spark put the tails back and later...
- Started by jimthegent
- Replies: 81
-
It's with regret I have to inform you, Christina (Sparkychick) has passedIt's with regret I have to inform you that Christina, the Sparkychick...
- Started by Dan
- Replies: 79
-
UK Identifying live, neutral and earth in outdoor festoon lightingI bought some outdoor festoon lighting a few years ago and the 2 pin...
- Started by Richard Cook
- Replies: 68
-
After a New Consumer Unit, now I need EICR & 100A DP Isolation SwitchTrying to organise a CU replacement at home. It's a 1930s property...
- Started by i3_happy
- Replies: 65
-
Im testing some badges out.You may be awarded some but they will be taken away again so please...
- Started by Dan
- Replies: 63
-
Will you vote?So the general election upon us after a month of farcical campaigns by...
- Started by westward10
- Replies: 57
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.