-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
Whoever fitted the solar panels should have dealt with this - did they ride off into the sunset wearing stetsons ?
As above, it means the meter...
- jerriais
- Solar PV Forum | Solar Panels Forum
- 4
- 23K
You need to pass the job on to someone who is competent and up to speed with solar installs and regulations .
Thanks Dave, I appreciate the reply as I knew it was something I wasn’t picking up.I’ll read up in the regs book on an IT supply as Can’t say I’ve...
- Core Power
- Solar PV Forum | Solar Panels Forum
- 4
- 1K
If the box has what would look like lights and crosses raised griding on the back then use self tapers to screw into it.
- vardymr2
- Solar PV Forum | Solar Panels Forum
- 4
- 2K
Hi Again
I have got the capacity set to 9600w/200Ah already on the bms and the only thing I have adjusted is the max charge at 50 amps on the...
- Tonyboy
- Solar PV Forum | Solar Panels Forum
- 4
- 2K
Solar
Aurora inverter issue
Hi westward10
Good to hear back from you. Like you, I also was foolishly muddled by the two similar error codes. The common 031 error is for a...
- Roger Willem
- Solar PV Forum | Solar Panels Forum
- 4
- 3K
I appreciate all that but don't really want to put all the details here in the public domain. If I can identify someone who I can have confidence...
- BeeJayEff
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
Somebody said that the hottest day this year went up to above 40 degrees
Have any checks been done on the incoming supply and also the inverter output, it seems odd that your installation is relying on a metal water...
What settings are you tweaking?
- Goldfinch1
- Solar PV Forum | Solar Panels Forum
- 3
- 1K
Many thanks! I'll give them a buzz, and see what they say :)
- wheeto
- Solar PV Forum | Solar Panels Forum
- 3
- 3K
2013, hmmm, that's an old thread, I was chasing a Sunny Beam.
Allan.
- Sticky
A very good summary from GBDamo.
I did the heat pump online course from STIEBEL ELTRON earlier in the year, mainly for my own interest (I also...
Not at all, mate. Just having a joke.
- ticktockhouse
- Solar PV Forum | Solar Panels Forum
- 3
- 1K
Hi James, did you sort out the issue of where and how?
I built a cupboard outside which I then plasterboarded completely as well as insulated it...
- richie9648
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
Ooops, I assumed the OP was talking about two strings of 18 panels each!!
- Rogerdygas
- Solar PV Forum | Solar Panels Forum
- 3
- 1K
Did you ask your solicitor to get paperwork/contracts before you signed for the house? If not you could find it very hard to get anything
Also best to ask as AFAIK if you have more than 3.7kW (16A) there are extra restrictions, etc, on the system and to what you get in payment.
- Manfred Jarvis
- Solar PV Forum | Solar Panels Forum
- 3
- 1K
Thanks James - The earth is TN-C-S. This means the earth is derived from the neutral at my inlet. The DNO live and neutral are disconnected by...
- snarler45
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
Balcony says apartments or condos to me. Best check with management first.
Then come solar hours in that location. 800 watts with out a...
- wind01
- Solar PV Forum | Solar Panels Forum
- 3
- 1K
Not sure of the following any...
- Ajax123
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
Having 6.15kwp array does not mean it will generate that. There are many factors to consider such as orientation, angle, temp, wind, irradiance...
- Jimglasgow
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
Regarding the RCD(PV) - in the single way enclosure near the main CU - between the load terminals of the 16A mcb in the main CU and the...
- Bsharp
- Solar PV Forum | Solar Panels Forum
- 3
- 2K
To pair the hub to the charger you need to first plug the hub into your internet router, wait for the light to show its talking to the server...
- treezleef
- Green Energy Forums | Green Energy Hub
- 3
- 4K
The problem is not GMT (UTC) or BST (DST) it is the not knowing what the times are, I was told to start with midnight to 8 am, then sorry no it's...
- EricMark
- Solar PV Forum | Solar Panels Forum
- 3
- 532
https://myenergi.com/product/harvi/
- BeeJayEff
- Solar PV Forum | Solar Panels Forum
- 3
- 3K
reading the instructions has lead me to believe that the unit can only provide 11kw and i think it includes the pass through current that would be...
- Porkstone
- Green Energy Forums | Green Energy Hub
- 3
- 1K
The current output for a circuit of dissimilar devices in series is limited to the current of the lowest performing device in the entire string...
Hi KungFu Turkey Leg and Mainline
Thanks for the link Mainline I will see if they are any help.
KungFuTurkeyLeg, as far as I can see the mppt...
- Tonyboy
- Solar PV Forum | Solar Panels Forum
- 3
- 504
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Would you use an old CU to extend cables.Like the idea of hinging the ply. It was in the back of my mind that if there is a fault back...
- Latest: MJS_84
-
External halogen light wired directly to hallway light circuit - No isolater / switchHello All, I hope that asking this does not annoy too many Members who think that the answer...
- Latest: chris murphy
-
375kw squirrel cage 415v motor starting issuesstart-up torque should be about 1/3 of the rated motor torque in delta.
- Latest: James
5 Popular Electricians Tools Thread
-
Automatic gyroscope laser levelAutomatic Gyroscopic Laser Level Do they all automatically stay level...
- Started by Dan
- Replies: 36
-
hand tools when your old and falling apartHi All. Hoping for some advice please. I've severe arthritis in the...- Started by richy3333
- Replies: 27
-
I've got one somewhereThis is a hardware shop in Market Harborough called Frank Gilberts run...- Started by westward10
- Replies: 18
-
Medical QuestionI have a medical problem. I can't stop buying tools. If I see a well...- Started by Marvo
- Replies: 19
-
What the best bag/ pouch/ bucket?I’m just trying to find out which tool, bag, bucket, would be best for...
- Started by Jaybird
- Replies: 12
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.