Search results | Page 10

Search results

  1. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    Thought as much but wanted to be sure :). Thanks for confirming! Yes no need - smallest tails present are 16mm2 and the cutout is 60A. I would have bought a two module but they just have 20mm knockouts - no good for tails!
  2. S

    Chimney breast temperature.

    Would I do that? :)
  3. S

    Chimney breast temperature.

    Absolutely agree! If it needs it that is what I'll fit. I just didn't want to spend that if the chimney breast would be like 50C max and fine with some heat resistant flex. Looks like I'll be replacing the ring cables with MICC as well then.
  4. S

    Investigation on massive electricity bills

    *throw them (too late to edit!).
  5. S

    Chimney breast temperature.

    Great suggestion, thanks, but horribly expensive - like £50 just for the cable to get round the fireplace. I don't want to spend that unless I can't avoid it! (Own home so no-one to pass the cost onto.)
  6. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    He went for it! Got the enclosure. Now just need to check if any of the isolators I have will fit in it.
  7. S

    Chimney breast temperature.

    I'm trying to find out the likely maximum tempertaure that will occur on a chimney breast so I can work out what type and size of cable to use for a socket, and whether I need to move some existing cables. The chimney is granite with a clay liner and will be serving a multi-fuel stove with a...
  8. S

    Investigation on massive electricity bills

    Has your client checked that the readings on the bills match the readings on the actual meter(s)? Wouldn't trust suppliers further than I could through them...
  9. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    Probably depends who's fitting it - one rule for us and another for them!
  10. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    Quoted for one of these Europa Components MEC4T 4 Module Metal Enclosure with lid (tails) IP40 - https://www.electricalcounter.co.uk/products/Consumer+Units/Europa+Circuit+Protection/Enclosures/4+Module+Metal+Enclosure+with+lid+%28tails%29+IP40/3142604240 in the end, though not sure if he'll go...
  11. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    Awesome suggestions thanks! I'll look into all these and price it up for the customer ASAP. Sam
  12. S

    IP ratings of outdoor light fittings

    The instructions say indoors only - looks like someone's put the wrong product in the box to me!
  13. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    Thanks! That's the best I've seen so far, though I note it doesn't have a (metal) door so still not strictly Amd. 3.
  14. S

    Amendment 3 2-module enclosure or 100A DP isolator.

    I have a situation where I have fitted an RCD incomer consumer unit alongside another existing RCD incomer unit to provide RCD protection for remaining circuits. I didn't fit an isolator for the two units so to turn off all power to the building you have to turn off both RCDs. I know there was...
  15. S

    AMFM Facilities Management

    I've declined it - their response to my request for installation instructions was that they are not required as we will not (contrary to their original instructions) be taking the units off the wall! Naturally, I pointed out that the regs require the instructions to be taken into consideration...
  16. S

    AMFM Facilities Management

    Thanks for the replies! I have emailed AMFM and asked if they can send copies of the installation manuals for the products. If they can't, or if what they are asking for does not make sense in the light of the manuals, I think I will be taking your advice. Either way, I'll keep you posted...
  17. S

    AMFM Facilities Management

    33 Sheen Lane, London according to their website. Looking on Google Earth they actually have a shop front with their name on it. I haven't managed to find any info on their financial position, when they were founded, or anyone else talking about them.
  18. S

    AMFM Facilities Management

    The company appears to be working for Travis Perkins in this instance, not sure if they would be more inclined to do some checks than individuals contacting the likes of LOM. None the less I'd probably have passed on it if I wasn't seriously short of work at the moment. I believe some a bit...
  19. S

    AMFM Facilities Management

    Hi Folks Anyone done work for AMFM Facilities Management? I've had a call from them asking if I could fix a few bathroom cabinets that have been wrongly wired - apparently by a company which has now been taken over by another, who want to put this right. I'm interested in knowing: 1...
  20. S

    Metal lamppost in garden... TNC-S

    Well that's me told! Awesome explanation :-) Too lazy to do the maths, me!
View older results

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top