Im looking to contract hire a new vivaro probably on a 3yr contract, im just wondering thoose of you who have leased do you have any advice? Im happy with the costing Vat mileage ect but worry about the costs should it (probably will) have a bump or scratch?! Getting quoted around £240+v with...
https://www.superlecdirect.com/p-j804-hager-20amp-4-term-maintenance-free-junction-box/
Why not use there they are brilliant and more professional imo.
Thanks @James and others.
yes @snowhead your not far off. Its a tank fed of a stream, to be pumped to a holding tank for cattle/sheep drinkers. Bore hole pump being used as head is 70M ish and 500M length of pipe. Pump has been trialed manually on an extension lead took around 7 minuets to...
Hi guys and gals.
a job that has got me second guessing my calculations. I have been asked to fot a float switch to a pump not a problem but the distance is 525m. Now there is no load on the float switch as i will be using a contactor to switch the pump Locally. So can i use a small 1.5mm 2c...
Thanks @pc1966 For giving it so much thought. I feel that the submain does need to Be protected/meet Disconnection times. A parralel cpc is not an option. I agree that with the outbuiding fully rcbo covered that the time delay rcd on the sub really shouldnt be causing issues. I am going to leave...
Correct @davesparks it is a TN system, i suspect the plan may have been to install a TT system as the outbuilding has upfront time delay main switch followed by full rcbo cu.
thanks for info brain wasnt working lastnight. So im left with 4 options to get this install to comply.
1- TT the...
what would the Max zs be if a 100ma time delay rcd were fitted @ origin to cover the sumain?
it is just poor design. Distance way to far to meet fuse disconnection times.
If a 2 core swa was run for a submain to an outbuilding with no extraneous parts in it, but the zdb reading was well over the maximum earth fault loop impedance. Could an rcd time delay be installed at supply end to cover the submain ie increasing its new maximum zs reading?
Hope thats clear ?
Have you confirmed that the tns supply has not been converted to a tncs? In my view any supply to a caravan site should be TT earthing arrangement with upfront rcd time delay.
How old is the installation?
Sorry @davesparks i dont think there would be much init economically probably slightly in favour of the instantaneous. & from the salon owners point of view running out or having no hot water is a nightmare and very unprofessional as hair that is coloured or wet cut cannot be done Snd the...
well for a start you are only paying for what you use. Water heating via electric is never going to be cheap, the unveted tank would continually be Keeping the water up to temperature and possibly the Water would not get used.
I have fitted two 8.5kw shower in a salon for hair washing, these were mounted on the wall behind as there was no problem with trip hazard. 7 years on both shower working fine and are fit for purpose. Dont see why most replies find it so bizzare to wash your hair with an electric shower as many...
thanks for all the replies i have ordered the usb cat5e adaptors. £9.99 on amazon. The run is approx 30m and yes it is a spare cable run from till to back kitchen. Once fitted i will report back if it works, hopefully then this thread may have some value to members in the future.
problem is this printer has the plug on the end As seen in pic. Has anyone been able to extend this cable using cat5e or use an adaptor of some kind. I have aspare cat5e nearby i can use, otherwise running a wire will be a nightmare in a newly refurbished property. Ps the other end of the lead...
I would say 2 semi detached 3 bed houses a day is achievable with report done including observation sheet. This would be testing only and no repairs unless very very minor.
£125-£150+vat per test.
thanks @westward10
If they were replaced with 225w replacement bulb or the ballast were all change to 160w ballast (same as new bulb) you wouldnt expect a problem.
What about the difeence between electronic & a magnetic balllast being used with the uv lamps?
A customer has decided to Replace there sunbed tubes (48) with new tubes, the problem is that they are starting to blow/not work.
Wondering weather the new bulbs are compatible with the old ballasts.
Reading up there are electronic and electromagnetic ballasts and i believe there are 48...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc