You could try switching off the power at your consumer unit (fuse box, big red switch normally) and then check to see if it still indicates a reverse flow on the meter. If it does I would request a meter change from your supplier.
Hi everyone,
I have the above controller and want to install it on a Vaillant ecoTEC Plus 838H boiler, the programmer instructions are vague to say the least but there appears to be 2 options.
Method 1 live link pin 1 of the controller receiver and use a single wire to connector X1 connection...
You can buy DC-DC converters fairly cheaply which will drop a 12v car battery down to 6V. I would however get some inline fuses fitted to both supplies and always make sure you connect the battery polarity correctly.
Example below
View...
Am I missing something here ? Where is the live feed to the meter, I can see the neutrals in and out and the live out only.
You have a 3 phase cut out but this is supplying 3 single phases so cannot be reassigned for a 3 phase supply.
You could be looking at a new 3 phase service being installed...
My company gave me a “Body Map” to fill out, there was a picture of a person where you had to circle areas where you were suffering pain and then mark each pain on a 1 to 5 scale with 5 being the worst.
I just circled the person, ticked 5’s for everything and sent it off.
The ambulance arrived...
My pet hate.....Colour Harmonisation!
3 phase meter change...all grey apart from L3 load which was brown....it was grey when it was finished!
Strange thing is on CT metering all the CT wires and the sense voltage wires are red!
It’s obviously steam powered, the wire is actually a pipe and there is a self contained boiler in the enclosure at the rear.
Neither Fleming’s Left or Right hand rules apply here.
I went to a commercial property a few years ago to replace the meter and was told it was located above the suspended ceiling. Stepladder out, lifted and moved panel out of the way and peered into the void.
Nothing to see.....no cut out, no meter.
“You sure it’s up here?”
“Yes...look up!”
I did...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc