Hello
All fixed, i persisted and found kitchen light was wired wrong. Swiched live was wrong in the kitchen rose, it was going to neutral instead of switched live and therfor the one in the switched live which was marked with tape was wrongly taped and was acually a normal neutral. Thankyou...
Beleive me i found out neutral was live originally the bad way. The tester as you say is not ideal but is working better thsn nothing.
Can you advise if a earth at the light switch was lose or out, would that cause this. Only reason i ask is condidering it was working when i put back the...
Clearly trouble shootinh with cheap finger tester has limited scope. A electrician would have better kit and know slot more than i do. I might need to admit defeat and just hope to find a electrician in essex that can look at this and fix at short notice for me.
Hello.
Yes, when using the cheap finger tester. Tge neutral on the kitchen rose is live i.e it is powered / tester lighting when you switch on light to kitchen. No other neutral is live in this way on any downstairs light as i have checked them. It works fine i e light turns on though but i...
It is possible i suppose that their is somehow a junction box in between kitchen light which is where the feed to flood light junction box is taken. but i doubt that as only about 2 metres and why would you take a feed from light and then put in another junction box before feeding it to flood...
sorry, was not getting updates to thread. ok, lets start. I am using a cheap finger live tester i.e stick finger on end version, but it works. when switch is turned on for kitchen light which is the one that the spur for the flood is taken from the flood glows dim and their is live at...
One thing I did note when light was working was switch would turn on light when in down position and swapping the COM and L1 around did not make any difference, does this assist in ideas or just mean a second issue ?
Hello
Really need some help please. Today I changed a outside light with the old light working. Drilled 2 new holes for raw plugs and wired in new light live, neutral, earth and light does not work. Changed light, changed wire, etc and after hrs of confusion found neutral is faulty as it is...
Hello All. Today i have pulled alot of floorboards up etc. Found builder had done a few joints using the screw in connecters with no sleaving on earths. Sleeved the earths but that would not cause the issue. I then set about the only socket not passing conuity test. I found that this was...
Hello. The power was switched off when doing continuity tests. But in theory if the cable has been cut by builder. I was trying to work out between which 2 power sockets. I have identified one and to identify the second i would normally remove both sets of wires from identified socket, so in...
I had the kitchen wall knocked down recently and wireing on that wall put else where. Kitchen is down stairs and issue is only upstairs. But thinking wire may have been cut. The CU was only changed 3 years back and no issues detected then which is why i am thinking this. So more boards...
Hi. No, not live testing. Continuity testing on dead circuit by taking face plate of and testing between the 2 reds etc. Life testing was done using a no touch tester also. Just to confirm results. End result is a wire cut / disconected somewhere of one socket. Cannot trace without having...
The Electrician supplied and fitted CU. Signed of as such with a note saying no continuuaty on ring main CPC. Put such on note on CU also. But clearly i want it right. He advised trouble shooting etc could take long time / money and to do some basic checks myself. I did as above pinpointing...
Hi. I was using continuity metre, got it down to one plug, had floor boards up. Can see the wire that does not energise one way but would need more floor boards up to track. All other sockets have continuity using metre etc. Electrician advised i have a look for loose wirs and see if i can...
Hello. All 3 wires, life, neutrol and earth have no continuity on upstairs sockets. Found only one socket upstairs having issue but electrician tested from CU when fitting. So assume that means issue betwwen that socket and CU ?
Hello.
Had consumer unit done and 2 faults noted. Downstairs no continuaty on earth sockets. I have been up all night and found dodgy crimp connection. Thats all fixed. Second was no continuaty on all 3 wires for upstairs sockets at CU. I have literally taken off all sockets and all but...
You are correct. I was trustworthy, he said it was going to be signed off etc which i was surprised at giving the lack of grommets, earth sleeving etc but by this time, i could only withhold money and take corrective actions. I will pay the £350, BC will be happy, the builder wont be when he...
Its local authority BC. Basically i withheld the final intallment of £1800, gone down to £1500 as he did not finish plumbing i.e left me with no waste downstairs so no toilet, bath etc working. I told builder he would get the £1500 when BC are happy and they want sign off for extension...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc