Search results | Page 3

Search results

  1. J

    Fuse size for sy plan am2

    So, just go for the 3 amp fuse then. Has anyone actually done the latest am2?
  2. J

    Fuse size for sy plan am2

    no, that just a wiring diagram of the heating system. I want to put a 3 amp fuse in it. just want to be sure. would be my luck to fail on something like that. just though the heating would be on 6amp with a 3 amp fuse.
  3. J

    Fuse size for sy plan am2

    just thought its common to have a 6 amp with 3 amp fuse? they give you a box full of fuses and breakers etc. you have to chose the correct type. has anyone done the am2 recently?
  4. J

    Fuse size for sy plan am2

    This is the spec
  5. J

    Fuse size for sy plan am2

    Defo 16. I have always seen them on 6? Obviously wouldn’t put a 3amp fuse on 16amp breaker? The spec tells you the cable size and breaker size, not the fuse? Just wondered if anyone had taken the am2 recently to clear it up?
  6. J

    Fuse size for sy plan am2

    Hi, Can anyone who has passed there AM2 please tell me what size fuse they used for the sy heating plan. It is fed from a B16. So, would it just be a 13a? I have seen them just on a 3a before. Cheers
  7. J

    Safe isolation on lighting circuit am2

    On the test the require you to just isolate the lighting circuit notbtbe whole board. So, identify the breaker turn off and lock off. Then switch switches in all positions, then test at fitting. (Obviously testing voltage tester with proving unit before and after). They want you to demonstrate...
  8. J

    Ze, pefc and PSCC on am2

    That’s good to know. Another thing I was wondering was when doing the single isolation on lighting circuit. Do you switch the light switches in all positions to demonstrate that light does not come on then test at the fitting. Or, test at the fitting With the switches in every position. If that...
  9. J

    Quick Step Electrical NVQ3

    I am just coming to the end of my quickstep nvq3. Don’t let the name fool you! It does take a while gathering all the necessary evidence. You have two options the self build portfolio (which I did) or the tutor comes out and takes pictures and does it for you, for double the price. The self...
  10. J

    Ze, pefc and PSCC on am2

    Yeah, that’s cleared that up. Just trying to get everything to sink in. Going over and over everything. Probably overthinking a bit.
  11. J

    Ze, pefc and PSCC on am2

    Good point. I think the supply tobthe board is RCD. That’s why been advised to do a two lead low
  12. J

    Ze, pefc and PSCC on am2

    Cheers. Literally just wanted to know if you set the tester to 2 lead high or low. As I have been advised to set it on low. I would usually set it to high?
  13. J

    Ze, pefc and PSCC on am2

    Hi, Could someone who has completed their AM2 please give some advice? When commencing your ze, pefc, PSCC. Do you set your megger tester to high or low. I would normally set it to high for the ze, pefc and PSCC tests? Although, I have been it should be set in low because of the RCBO on the...
  14. J

    Safe isolation on lighting circuit am2

    That’s fine. But, just wanted to know if you test at the 2d fitting with the switches in every position e.g three times. Or, just switch the switches in every position to show the light does not come on then test at the fitting once? I’m just sure I was told to test on low because of the RCBO...
  15. J

    Safe isolation on lighting circuit am2

    hi everyone, When demonstrating safe isolation on the lighting circuit on am2 do you operate the switches and test each time you operate. Or, just operate the switches in every position then just test once at the 2d light fitting? Also, when commencing a ZE test would you recommend setting the...
  16. J

    IR test on DOL to motor AM2

    Also, do you use the two lead low setting on the megger tester when doing the ZE, PEFC, PSCC?. Cheers
  17. J

    IR test on DOL to motor AM2

    Cheers for that. Just do all phases to earth then from the DOL to motor. How did you find the test?
  18. J

    IR test on DOL to motor AM2

    Sorry. Supposed to say have to IR test. Slight spelling mistake
  19. J

    IR test on DOL to motor AM2

    Does anybody know if you only to an IR test on the cables that you have pulled in from the DOL to the motor on the AM2? So, you would just do L1-E,L2-e, L3-e, Then L1-L2, L1-L3, L2-L3? Obviously from the DOL to motor you will only pull in brown, black, grey then and earth with no neutral.
  20. J

    Am2 exam live testing part need some help please!

    Obviously you would take the lead out of earth and put it in nuetral when doing PSCC on 2 lead test. And change the dial on left to L/N?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top