Search results

Search results

  1. telectrix

    BACK ONLINE WITH THE BEST FORUM AROUND.

    Sent to Dan and he will post . I can't download from phone to laptop.
  2. telectrix

    Dodgy trade pictures for your amusement! - 1 Million Views!

    it gets wet. should have bee IP68,like what my phone is.
  3. telectrix

    The big difference in the electric terminology and installation regulations and practice in each country!

    rubbish. if i see a measurement in inches, i can visualise it. if in cm, then i need to work out 25.4 = 1", so,say, a 25 measurement is stated, but it does not tally. it's 10" less a bit. also,e.g. my tappets on my van engine should be 10 thou. i set at 0.25mm and they rattle.
  4. telectrix

    Fitting bolt in fitting

    secure the bolt head with some tape or gorilla glue. it's supposed to be captive but relies on contact with the wall to stop it falling out.
  5. telectrix

    BACK ONLINE WITH THE BEST FORUM AROUND.

    i'll try and add a pic.bear with me as i've emailed it to myself from my phone. now i nee to see if i can download it.
  6. telectrix

    UK Found a cable in my back garden…

    if you are reading Mohms, that's a resistance, not a voltage. a non-contact tester could be useful here, but don't rely on it for safety reasons. a photo of the cable itself would be useful.
  7. telectrix

    BACK ONLINE WITH THE BEST FORUM AROUND.

    hI, I am back with apologies for my prolonged absence ( I haven't got a sick note as my GP wanted £35 for do one). Had a couple of heath issues ; still got a load of pain, mostly back and legs. Anyway, on a lighter note, early hours of Tuesday morning, one of our mutts ( Willow ) gave birth to...
  8. telectrix

    Light/switch fittings

    all depends on your plasterer. usually the switches & sockets can be pulled forward (depends on the cable slack) enough to plaster around, there are magic things called yoozy boxes that can be fitted enabling the muck spreader to make a neat job without the usual trick of gumming up the...
  9. telectrix

    No earth electrode visible?

    you say there is a main earth from the supply cut-out. does that mean it's been upgraded to PME? what's the Ze?
  10. telectrix

    Fitting new Cooker hood

    that wattage is just aboult 1A so will be fine.
  11. telectrix

    UK Upside Down UK Plug Socket - Is This Normal/Ok?

    only problem could be that the electriccs leak down through grVITY TO THE EARTH PIN, THUS CAUSU=ING YOUR rcd TO TRIP.
  12. telectrix

    Fitting new Cooker hood

    fit a 3A or a 5A fuse, depending on the hood's requirements. RTFM
  13. telectrix

    are there Zone 1 Changes?

    the 12v "rule" is a myth put out by a wet-pants showing off his lack of knowledge. 240V is OK as long as it's IPX4
  14. telectrix

    Best way to install a very tiny light

    not been on for a while since having a partial hip replaced ( the ball on top of the femur because sawbones could not fix the break close to the joint ). need some muscle exercises to get the legs working better.
  15. telectrix

    Best way to install a very tiny light

    battery powered PIR light. only a few quid and no wiring or switches required.
  16. telectrix

    Quickwire Now Sponsor ElectriciansForums.net

    you may remember that i asked about this a couple of years ago and you replied that you were working on it. nice to see you are progressing. it will be a life-changer if and when a ring pair in a wall fall foul of the wood butchers fitting wall cupboards.
  17. telectrix

    For Sale Project - pallet loads of kitchen goods in need of repair or selling for parts

    if you were to do pallets of cordless tools from major makes, e.g. dewalt, bosch, milwaulee, etc, ( not mickey mouse DIY tools) you'd be sure to get positive responses here.
  18. telectrix

    Tightening locknuts with hammer and screwdriver-dog rough or not?

    my local housing association has flats, making a fortune from rent and leasehold charges. fleet of new Transits every 2 years. and you should see the bodged repairs. broken timber purlin repaired with a couple of coachbolts. no support. disabled ramp that nobody can use. ( this eventually was...
  19. telectrix

    Having issues and need some advice.

    still stick with my theory that heavy loads will drag down the supply for a few millisecs. when starting up.
  20. telectrix

    New supply to Combi Boiler

    1.5mm T/E is the correct cable. no need to bond pipes at boiler. 3A fuse in your FCU.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top