2365 | Page 4

2365

Recent contents View information Top users
  1. S

    level 3 2365 hotel

    hi there this question is in regards to wiring the hotel on the 2365 design project. my question is can i just complete the installation with 4mm all round. the circuits consist of numerous radial circuits and a number of SFCU points for head towel rail and A/C unit. thanks
  2. W

    Has anyone on here completed the 2365 level 3 design project??

    Hi I was wondering if anyone has completed the 2365 level 3 design project and would be able offer me some help on some of the questions....many thanks
  3. M

    Post 2365 Help....Life after the course!

    Hi, just completed my 2365 and 18th edition last week, was just wondering if anyone can help me on a few of these points: 1) Acquiring an ECS card......I qualified last Thursday, the centre say my certs won't be ready for 4-8 weeks, when I rang up the ECS they said before I can apply for my...
  4. G

    2365 Level 3 Design Project. Volt Drop feed to Summer House and earthing

    Afternoon Gents, just a query regarding volt drop and extending the equipotential zone on a PME in the level 3 design project. In my design I used a 16mm armoured and the associated volt drop was 5v, this left 1.9 volts for the lighting ring in the summer house. Tutor said not to worry about...
  5. C

    I Need Work Level 3 2365 looking for work experience , Walsall area.

    I completed my level 3 C&G in Electrical Installations 2 years ago and have had some work experience with a local electrician mostly doing home re-wires. I am hoping to find work with an experienced electrician who can help me to develop my knowledge and skills further.
  6. H

    I Need Work Level 3 2365 & 17th edition looking for a start in the trade. Swindon area, 40+ miles range

    Hi, as the title says I've recently finished my Level 3 course, I'm based in Swindon but have my own car and I'm willing to travel up to roughly an hour or so for work. I usually do up the electrics when it goes wrong in my parents house which hasn't been more than a light switch or rose, but I...
  7. T

    Tips/Material on passing 2365 202&203

    Got my test coming up next week on the science and regulations of LVL2 2365. Was wondering if anyone has revision tips or any resources good for these? Thanks
  8. J

    Level 3 2365 ,how hard is it?

    Hello, New to this forum Recently completed level 2 at evening class. All went well & didn’t find it too hard. What I have seen online about level 3 ,makes it seem really difficult? Can people please let me know just how tough it is? I know it’s a lot more theory based. Thanks for any help DJ
  9. Lister1987

    Best calculator for 2365?

    Attended enrollment yesterday and I'm now "official" (6 days to term start), We're advised to get a scientific calculator so was wondering; those that have done the course, what calc would you recommend?
  10. Lister1987

    2365 Reference materials?

    Hi guys, had my interview for my course last week and have been given a place, starting on 28th August with induction. Those that have done the 2365 L2 course, are there any reference materials you recommend? On my Amazon List I've got; The City & Guilds Textbook: Book 1 Electrical...
  11. A

    Level 3 2365 302 Practical

    Hi all, Doing my Level 3 2365 302 practical (Transformers) on thursday. Does anyone have any ideas on what I can expect? I have been revising the tranformers handout on the smartscreen but I'm still unsure on what the practical will focus on. Any advice would be really helpful! Thanks
  12. W

    2365 305 design question

    Hi all, im new the the forum. Curently doing the city and guilds 2365 level 3 course. Got a question regarding the 305 design assignment. When filling out the table to calculate the voltage drop and calbles sizes, do i use the design current etc before or after the diversity factor?
  13. R

    2365 Design Project - May need some advice.

    Hello Everyone, As many of you know I am doing my Design Project. I am working on Q4. I have had a go, but I am unsure of some of the questions. I was just wondering if it would be possible to get some advice on what I have done, whether it's correct or not. Also for Q1, we need to draw a...
  14. S

    Help please: 2365 Level 3 Unit 305 Design Project

    So i'm a little confused at the min with the adiabatic equation to verify minimum cpc csa.. My circuit is a 16A socket in 2.5mm singles (bunched in conduit) I worked the Zs out to be 0.26Ω To work out the minimum cpc csa to satisfy ADS i'm not sure if I should use the Ipf of the circuit...
  15. SJM1995

    Recommend a fast track C&G 2365 Training Provider

    Can anyone recommend a training provider to get C&G Level 2 and Level 3 2365 Qualifications in South-East London/ Kent area? Ideally looking for a provider that can do the course full time in the space of 16 weeks~. I've seen the likes of AbleSkills who offer this course, but are currently...
  16. L

    I have finished my L2 & 3 2365, now in need of practical experience?

    Attempting to become an electrician as a change of career. I have now completed 2365 lvl2 and lvl3 installation and inspection. I'm in need of some practical experience and maybe a job opportunity. Based in Birmingham, UK. Any advice?
  17. L

    The best learner books to prepare for my C&G 2365 course?

    Hello im starting the C&G 2365 course in the next couple of months as soon as I've finished up at my current job. Anyone got any books to help with studies and to build up my knowledge prior to starting the course. Yes i know im a bit sad but i'm itching to get started! Thanks in advance...
  18. W

    2365 level 3 weekends west london

    Hello Guys, I'm struggling to find 2365 level 3 weekend course in West London. I tried CG website but it doesn't seem to be updated. Can you please recommend a place where I can do it? Thanks, Jakub
  19. L

    2365 design assignment, pool area and cafe, hotel

    Hi this is the electric car charger, is this suitable? Can anyone point out anything I've missed. Also what is the best way to draw the circuits onto each drawing. Any suggestions are great fully appreciated
  20. S

    New member looking for guidance on 2365 - unit 305

    Hi Im Dan, I'm currently enrolled on 2365 Level 3 and im having difficulty with some parts of the coursework, just looking for answers to some questions I have. I have 10 years experience with control systems, more specifically in hazardous areas, hence why i'm struggling with the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top