We currently install industrial washing machines, driers and finishing equipment. These can be three phase and single phase. Normally no greater than 32 amps.
When on a commando socket we will install an AFDD.
If we remove the commando socket and install a standard rotary isolator, do we still...
we have had installed some Hagar ARM932U Arc Fault Detection Device in one of our care homes.
they had reported tripping issues , so i tried to do an (RCD) Residual Current Device test.
it wont trip at any current.
looking it up it seems they are not also an rcbo . if so whats the point of them...
I understand that the IET say AFDD's 'must be considered' for hotels, however in HMO's, High Risk Residential Buildings, Student accommodation and care homes they are a requirement on sockets not exceeding 32Amps as stated in BS7671 (421.1.7). Why wouldn't hotels be compulsory? Is it just a cost...
I work in a care home. Recently we had some sockets installed. The Eaton DB's we have, will not accept AFDD's apparently, so the contractor fitted a AFDD in a metal module next to the DB.
I understand the reasoning for AFDD's in CH's, but one socket was for Sky Q equipment in a protective...
Hi All,
Question for you/ your oppinion.
I have a customer that owns a 3 bed hmo and has asked me to install and sign of a new consumer unit for him.
Thing is he has said he doesn't want afdd’s installed due to cost and claims he will no longer rent it as an hmo. I don’t believe him.
So how...
Has anyone fitted an SPD to a schneider standalone AFDD DB.
Isobar P B Standalone Active distribution board, Acti9, 24 AFDD ways
This board only takes AFDDs so there is no where for the SPD MCB to go. There is a DIN rail next to the main switch. The SPD comes with a separate enclosure.
Acti 9...
I'm planning a replacement for my existing domestic CU and would like to have it sanity checked before I get an electrician involved. The main reason for replacing the whole CU is that I would like to have an additional circuit to the attic which would be isolated from the existing one. Long...
With AFDD's still being a widely discussed topic, we have put together a guide that either you or your apprentices may find useful!
Electrical2Go guide to AFDDs
In the guide, we answer questions such as:
Are AFDDs mandatory?
What do Arc Fault Detection Devices Do?
Why do we need AFDDs now...
Work has booked me in for a CU change on the second floor of a 7 storey block of flats. They are under the impression that AFDD's only need too be fitted in the flats over 18m high, or the 6th and 7th floors. I'm pretty sure the regs 421.1.7 mean all flats in a block that high but it's...
Recently been working on a system design for a LL. I was told the building would be a three floor 16 room HMO, so the design was done to the current Regs for that use. When the LL saw the cost of AFDD's he 'blew a fuse' and said no way was he fitting them at a cost of over 3K. I explaned that...
What would of stopped this happening?
Job I did this morning.
SWA supply for outbuilding had sliced basic insulation at the gland due to poor wire stripping. Another outgoing SWA feed for an external GYM was actually back feeding water into the consumer unit as it was uphill and had some head...
Been a while since I last posted on here. Hope everyone is keeping well. 👍 I appears for interweb searching the MK or the new guise of MK are producing an AFDD / RCBO that will fit the MK Sentry CU’s. Is anyone actually selling them? I see that TLC show a manufactures spec sheet but unless I...
I’ve just been to quite a job,
Which is a domestic property being converted to a HMO,
The current Fuseboard is Honeywell with 2 socket circuits that I need to upgrade to AFDD’s,
Only I can’t find anywhere to purchase them,
Does any one know where I can purchase them?
Or if MK will fit?
Or...
There has been a lot of talk and concern about AFDDs recently. I am alerting you to a Webinar by BEAMA later this week that you guys might find useful following latest changes to Amendment 2.
Here is the link to find out more and register: Mythbusting AFDDs - A Webinar (beama.org.uk)
We've also...
We are new landlords and have just got an EICR done. The building is only 5 years old so I am shocked that remedial work has been noted as necessary/mandatory. Apparently AFDDs needs to be fitted as the building is over 6 story’s high (it’s a 4th floor one bed flat) due to a regulation that came...
Good morning all,
My first post on here! Be kind :)
I have had a customer come to me who has a care home for the elderly. I have not carried out the EICR but have been given the sheets. They have had an EICR carried out in December 2020, the EICR has failed on a couple of things one been...
I've been asked to install Schneider AFDD's into a single phase board. I'm to supply the board with RCBO's and AFDD's. I've purchased the new AFDD's with combined RCBO protection for 3 circuits. The issue I have is that they don't fit into an Acti9 board. I'm thinking of buying an additional...
18th 2nd amendment comes in, in Sept.
AFDDs are in it. To be fitted on socket circuits of 32A and above.
To be fitted in residential blocks of 6 floors and above, care homes and the likes.
Are these mandatory for everyone? If say you have a 17th edition CU, do you have to update to AFDD...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc