boards | Page 7

boards

Recent contents View information Top users
  1. M

    Softboard ceilings

    I've just had a look at pricing a rewire, house is probably over 100 years old and has rubber coated wiring in use from whenever it was modernised. The ceilings are boarded with a soft, cardboardy board that has a bumpy surface and the joins are taped (none of it skimmed) full room lengths in a...
  2. G

    Do split phase boards exist?

    Living out in the sticks. I have come across old split phase installations a few times and done a little maintenance on them. These installations usually consist of a old 3 rewireable db with only 2 phases used. Well for the first time I have been asked to add some circuits which requires a...
  3. S

    paralleling fuse boards

    First time post although avid reader. And first post is a question, sorry! What are people's thoughts about paralleling fuse boards. Been asked to install a new board by linking off the existing boards supply as the current board is full. They are lug and bolt terminals so can easily double the...
  4. rmaynard

    MEM3/Eaton Panel Boards

    has anyone fitted these lately? i find that the tab colours on the breakers make it look unprofessional?
  5. N6rul

    Fitting consumer boards

    Hello there guys, I am a bit confused regarding fitting consumer boards on wood. I am fitting one in a shop and I have been told I am not allowed to fit on the wood panels. But yet the suppliers have recently put all their meters and upgraded the supply to a three phase on the wooden panel...
  6. D

    Schneider Domestic boards...

    Anyone got any opinions on the above? Not used them before, but they seem pretty cheap in comparison to equivalent MK/Crabtree etc.
  7. C

    Chint boards

    Has anybody used a chint 3 ph board? For the size I need it comes in about £50 cheaper than a Hager. I've used the single phase ones years ago and they were gash!! This is the first job for a new customer so I don't want to be fitting rubbish and I'm a bit of a brand snob but if the chint is any...
  8. KoFi

    VT02 Fluke any one

    Had demo @ local independent wholesalers other day ordered the VT02 for now looks good for accompanying a E.I.C.R. for a local shopping centre with very old mains boards! Finds hotspots etc will compare the old Dorman smiths to the new schnieder boards ;-)
  9. R

    Underfloor Heating Insulation??

    Hi i have done many underfloor heating systems on ply lined floors but never on a concrete levelled base. The question i am asking is it ok to use polystyrene thermal boards with a mesh type mat i know they are ok with the foil mats but i am unsure with the mesh type. I dont want it to be a...
  10. G

    best boards

    can anyone recommend a good cu for top entry ?
  11. W

    cement board roof safety

    Hello all, got a 20kw on a fibre cement roof. Having roof survey, edge protection and safety netting installed. What do other use to walk on the roof? Crawl boards, ladders?
  12. M

    Hager invicta 3 a board

    Hi all Anyone fitted one of these thinking of putting one in a large posh house using rbcos. Should look mint. Invicta 3 TP&N style A Boards
  13. K

    3phase mains boards?

    Im going to be doing my very first 3phase mains board tomorrow, has anybody got some tips and advice they could give me?, and also has anybody got some photos of any 3 phase mains boards they have seen or done? thanks
  14. 4

    2.5mm2 T&E under ground floor, floor boards

    Hello, my first post! I've lifted the floor boards in my Bungalow and found that there is a void between the rafters and a solid concorete floor. This area being ventilated by air bricks at both front and rear of the building. Given the depth of the rafters drilling is not really an option ...
  15. T

    underfloor heating

    Anyone know of a decent underfloor heating system for use on top of floor boards under tiles
  16. W

    PDF. customer. unit

    Hi all. Has any body. Got. A PDF. For. Customer unit. That I can print out. If not. No worries. Will make one up. Thanks in advance.
  17. K

    Small Skeleton Boards

    Hi, Does anyone know where you can get small compact skeleton board (I need dual load 8 way max). I have seen Wylex do some but these are two tall for what I need as trying to replace old wylex board in ex council house and am limited by the existing housing unit. Thanks
  18. A

    Estimated age of installation

    Could anyone give me a rough idea of when the MEMshield 2 range of boards were introduced? And also, if anyone had an idea of when the old Square D. boards came out. Firstly the ones with the black MCBs & RCBOs, and also when they were replaced by the 3871 QOE MCBs. Google hasn't been much...
  19. infinity

    Multiple boards at origin & Easycert

    Just testing a commercial property which has all original equipment installed from a 100A BS3036 isolator to Main DB. Then 3 more DB's have been added before the switch fuse via Henley blocks. I use easycert and was wondering what anyone else does in regard to listing the arrangement. Would you...
  20. C

    Types of distribution boards

    Hello chaps I wonder if you could help me, I am currently doing a l3 diploma in electrical engineering, one of my assignment questions says 'with reference to manufactures publications, illustrate the main types of industrial distribution boards in use' is this referring to RCD/MCB compared to...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top