bonded | Page 2

bonded

Recent contents View information Top users
  1. UKMeterman

    Photo comp, why was the flush pipe ever bonded?

    Hi, I see bonds like the one below from time to time, what was the point apart from ensuring that an installation fault to earth would give you quite a tingle?
  2. telectrix

    Trainees Only... To Bond or Not.

    Lads/ladettes. See the photo of disused gas supply . The question is.... should it be bonded? answers yes or no, and raisins for your answer.
  3. G

    Eicr Code

    6mm singles from 100a TP 60947-2 in a main panel to an adcent enclosure to a 16a 60898-D Tp, then 6mm leaving this to air con units. Would you code 2 the 6mm singles from the 100a 60947-2? As exceeds current carrying capacity?. Or because the 6mm singles are less than 3 metres to the enclosure...
  4. HappyHippyDad

    Gas and water bonded together with a broken conductor?

    Evening everyone.. I have just undertaken an EICR and there is 6mm bonding to both water and gas at the correct points (within 600mm of entering building), however they must be joined somewhere as there is only one 6mm in the CU. I believe this would be ok if the conductor was unbroken but...
  5. G

    What code for Eicr

    If the bathroom lighting circuit is not protected by an rcd/rcbo,and the supplementary bonding is not evident,what code would be adviseable on the EICR.Your thoughts please?
  6. S

    Eicr

    Carried out an EICR today few things noted down to do,there is a 10mm equipotential bond on water and gas services. BUT the gas is bonded at the meter under the stairs and 2 inches down it enters the solid floor. also in the lounge there is a small gas pipe that comes out the wall to the fire...
  7. S

    PIR question

    First of all I'm not even sure if this needs to be marked down or not! I'm about to do a PIR on a friends property and whilst checking out another bit of work needing done I noticed that the main water service has just been bonded with a 10mm earth linked off the gas pipe and linked between all...
  8. G

    Metrel TEK118 Earth Bonded Metalwork Lead

    Hello everyone, I'm after some help. I have a Metrel MFT which I bought second hand & has a number of extra bits & pieces with it. One of these extras is a TEK118 Earth Bonded Metalwork Lead. It's a 4 pole plug which plugs into the MFT, and has 2 leads coming out of it. One lead has a standard...
  9. N

    Bonding Question Please PIR

    Hello all, I had to carry out a PIR today on a new loft extension, original builder went bust no EIC. The loft is being fed via a new RCD CU which is fed via a Henley block leaving a very old Crabtree non RCD protected board feeding the rest of the property, the loft contains one simple room...
  10. G

    Bonding commercial kitchens

    I'm working in a new build school kitchen at the moment and am bonding. We have taken earths around all the pipework and fan canopys but what about stainless steel tables, shelving, etc? Would this need to be bonded? Also, tables and racks which are on wheels? Obviously being on wheels you'd...
  11. A

    Main bonding - bonded or not?

    So what is really deemed as an acceptable conitnuity on your 10mm main b and 16mm earth b then? So its continuous, but what do we need for speedy tripping etc then? Thanks guys! :confused:
  12. A

    Commercial kitchen tables

    we have a site where in a school kitchen there is a stainless table with just a sandwich maker on it, we are being told enviro health officer said it wants bonding is this correct? the socket is rcd protected.
  13. R

    Moving bathroom water pipes under floorboards - earth bonding req`d??

    In my bathroom & toilet I have unsightly hot/cold copper pipes above floor. There is no earth bonding on them. If I move them to under the floorboards, do I have to have them earth bonded? Do I have to use a qualified electrician to do them if so? Thank`s.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top