I'm rewiring the house and want to include some cables for a home network - Internet, tv/sky/hd etc. If I was to run some cat 6 up to the loft along with some wf100 shotgun coax, how many of each should I ideally be looking at pulling in to each room to cover myself? I'm gonna use 25mm conduits...
Hi all , i am doing a first fix for a house at the moment and was just wondering if im correct in thinking that if there were to be 2 x sky boxes i would need to run a shotgun cable from each box to the dish position and a coax cable from same position to a booster.?
thanks in advance Dan
I've noticed that these have some kind of a black seal around the lip, and was wondering if anyone owns one and does it stop moisture getting in when you leave test gear in the van overnight. I've started bringing my metrel in at night as its only the standard fabric bag that it came with.
Maybe obvious, but are any regulations how to fit earth cables?
They always say all must be terminated to back box.
So when 2 cables coming to the box 3 wires sleaved with green/yellow should be inside.
1 of them ending in back box?
Right?
I hope you understand me.
I will make picture later.
Unable to access any(but can see most) of the round type screw terminal joint boxes.
Hello,
I carried out anEICR last week, and the entire house is filled with SELV recessed downlighting.
All of the (78fittings) have been skimmed around/over at some point, and the(dangeling) round type...
Crabtree loadstar single pole circuit breakers
6FS40C - 40 amp type C - 9 in stock
6FS20C - 20 amp type C - 140 in stock
6FS32C - 32 amp type C - 1030 in stock
All Brand new and in boxes - 10 in a box
60p each plus P&P
P&P is as follows:
£3.35 for 1 - 8 MCBs
£4.68 for 9 - 16 MCBs
£8.60 for...
Has anyone heard of these?
Apparently you place them in a backbox after a first fix ready for tiling so the tiler cuts the tiles properly.
Have looked online and cant seem to find anything?
Thanks
Hello
This is my fist post so go easy please.
I am using an Ashley J803 maintenance free junction box to join 2 2.5mm T&E cables. There is no other option but to create a join due to access issues, so it is unavoidable. It is under the subfloor on the ground floor so access will be limited...
Evening,
Anyone know the book/industry times for chopping 1g & 2g 35mm back boxes in concrete block and then fixing . All using power tools.
I know how long it would take me! But will be subbies... My luckins doesnt list it and my old spons only has chopping by hand times which I reckon my mum...
Hello All
Is there any type of square trunking that can be used outdoor for domestic purposes. The customer doesn't want to paint over cable or galvanised trunking and I need to run a 10mm supply to an outer building. Any suggestions? cant go In the ground either as he has blocks on top of...
As some of you know, I'm doing a first fix for family member. I now know that in a modern house its best to do loop method of wiring from switch to switch due to modern day down lighters and light fittings only accepting one cable. I did have a thought though (bear with me) as there are 3 x...
i have a few floor boxes for sale,
different brands
Brand new and still in their boxes
The best being 3 Compartment MK Floor boxes (4 of)
i also have the 2 gang switched sockets that fit inside them
The floor box code is 88113GRY
The sockets Code is K85671
if you do a google search it will...
I have just used 11 of these boxes with SWA terminations
They are awful and I dont want someone else to have the same problems I did.
They seem ok, quite sturdy and the price attracts you, however one or two of the screws snapped when doing up the front cover and then MANY more snapped when...
Hi Guys, Another little query for those of you that do new house installs. Not practical nowadays to wire light circuits via loop in systems due to modern day downlight recessed fittings and or light fittings designed for 1 cable!
If using joint boxes, lets say in a roof space, therefore...
Hiya Guys,
I hope there is someone out there who can answer my problem. I'll do my best to explain my situation.
Right then - I have been given the task by my employer to test/inspect some Distribution boxes.
(Here is a link from a random web site I found showing the boxes - Electrical...
I've been asked to look into this for a project where the client is specifying an IP rating for equipment within the meter box. I know that there have been numerous discussions on siting additional equipment within the meter box other than the service cut out and the meter and possibly an...
Just bought the dewalt toughsystem set up with the trolley, I'm fed up with lugging my tools to and from the van when parking a mile away in London. Anyone used the system before it seems to have good reviews, and I read about it on here be for when it was new to the market but just wondered if...
Hi,
We have just bought a flat that was built in the 60s. We had three sparks coming to the property and looked at the electrical systems as we wanted to install new storage heaters in the bedrooms. The indication we got is that the main circuit in the flat has not been changed since the 60s...
I'm going to ask what might sound dumb coming from someone of my age and experience, I don't do much now and have done very little in the way of domestic installations, having spent much of my time on commercial or industrial work, thats not to say I don't know how to install domestic electrical...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc