Hey folks
just wondering if any of you could give a possibility in what is happening. basically i have some family in the middle east they moved their for quite some time now. The power in this country isnt really stable for example it keeps turning off maybe twice a month thne when it comes...
Dear Patron,
I am facing a problem in EOT crane. The magnetic contactor coils are getting damage
frequently. Coil supply is 380V, 50Hz & coil resistance is 55 ohm. These contactors are
supplying to main hook motor & slipring resistance box i.e. the stator supply & rotor
supply.Contactors...
God morning, I fitted a 6 waysplit BG consumer unit the other day and the right side, starting at the main 100 amp switch have burnt out, literally flames and melted the fuses!!!....it is a 3 bed house with the usual mains/lighting/10kw shower etc and they have a PV system. After the meltdown I...
tlijl
Thread
burning
consumer
consumer unit
fuse
main
main fuse
mcb's
out
rcd
right
unit
I have a 2 year old Hoover dishwasher and a couple of days ago it started causing a burning smell. At first we did not know what was causing the smell but have now worked out it is the dishwasher.
Today I pulled it out and all looks OK. I sniffed the plug and that had the remnants of a burning...
Is this burning likely due to high resistance contact between the neutral pin of the plug top and the pin receiver in the socket outlet?
The appliance is a 15+ year old tumble drier that vents out the front loading door, and the plug top is of the moulded type and cannot be disassembled.
I recently fitted a new contactor three phase 10amp with 230volt coil, now it was working fine for about two weeks and now seems to have burnt out. I can not manually push the contactor in even using a screwdriver as it is solid. The overload is set to 4 amps so shouldn't be a problem with that...
I have been called back to a job where the pull cord is yet again not working. This is the sencond time they have had this fault.. Take the fitting down and the whole inside is a melted mess.. Now the shower is a 8.5kw fed on 10mm twin and earth on a 32a mcb. Install method B,
I have tested R1...
Just interested if anyone knows anything about this. I was chatting to someone in a wholesalers today and he said he had a lighting circuit feeding some LED fittings then a fluorescent then some more LED fittings, when he turns on the lights all the LED bulbs after the fluorescent blow straight...
Hi guys this is my first post great forum tho, got called to a house a few weeks ago one spotlight not working in the bathroom,
4 12v fire rated recesses down lights each with their own transformer, tested the fitting and no power blown tranny, thought great nice easy one, did a visual...
Hi guys,
I have installed a proteus 200a switch today, I was instructed by the technical manager at proteus switchgear how to wire a new switch as the one I needed to replace isn't in production anymore.
He told me to mount the new switch in an enclosure next to the board, use 70mm tails and...
Hi, just been over the road to look at a neighbours cooker not working, font the neutral in the cooker control unit burnt, load side, most likely caused by loose terminal as the others wasn't very tight.
but how come it seems to be normally the neutral connection that burns first, ie shower pull...
Hey folks, just wondering before I take apart my hoover and destroy it, the 13A fuse in the plug of my hoover keeps burning out (well I've replaced it twice). Is there any general simple answer to what could be causing it, or how it could be repaired? The hoover works for a few minutes, and then...
jagermini
Thread
burning
cable
check
electricians' talk
first
fuse
out
I have just been called out when client noticed smoke comming from 2g socket. Thinking this would be more or less straight forward to identify fault and rectify, I advised client to immediately turn off consumer unit and rushed to job in case of fire hazzard. On site, even with consumer unit...
Have customer with elecric powered gates. The supply for the gates comes from a plug in RCD unit in a kitchen socket. Apparently it has been like this for some years but recently the plug in unit gave off very strong burning smell and eventually burnt out and stopped working, i.e would not reset...
hi there, i'm not sure if this is the right forum to post?
the blue cable wire on the immersion heater keeps burning out and as happened so many times that paying £30 for it to be fixed is starting to pee me off!
i had a new immersion heater fitted to the water tank and the blue wire keeps...
Hi there, I work as an Oven cleaner and I have a heated tank (which heats up to 80 degrees F) installed in my van. I'm having problems with the fuses for the tank burning out after 2-3 weeks.
To heat the tank I plug a 13amp extension lead (unravelled) into the mains. Then an RCD socket is...
SOC
Thread
aus
burning
electricians' talk
element
extension
fuse
fuses
out
socket
I have been asked to test a property where they are having an ongoing problem with the CPC burning. I went a looked today and the cpc to the central heating has been rewired only recently due to the previous cable burning and it has happened again.
Can anyone shed any light on what may be the...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc