I need to make a motor that makes 3 revolutions a second for 6 seconds. It needs to be as small of an assembly as possible. I have a very good understanding of how circuitry and components work together as well as individually but don't know what ic would work for this or how to route the...
WEIRDGUYWTHAKNF
Thread
camera
components
controlled
led
motor
not uk
specific
Hi all
I need to purchase a thermal imaging camera for detecting hot spots in distribution boards.
Does any one own one?
If so what type do they recommend and any idea of a guide price?
What specs should I need?
As always thanks for your help:sunny:
Good evening all,
Im looking for a easy to fit cctv with HDR system that I can view on my iphone whilst I'm out. I only need one small free standing camera that will be set up on my window seal to keep an eye on anyone approaching my garden.
I've searched the internet and considered baby...
egginyourface
Thread
cameracameras
cctv
iphone
phone
security
small
system
Hi
ive just bought an after fit reversing camera and would like to wire it, so that it comes on when reverse gear is selected.
I have a twin electrics towbar fitted and was looking at wiring both the monitor and the camera directly into the external towbar accessory plug, via the reverse light...
speed camera van was on a47 in layby had yellow light flashing on roof and in front of it was a broken down lorry with cab up so thought it was breakdown for the truck till got closer and found out it was speed camera van.. Dam!
yeah i know shouldn't speed but forgot in van speed limit is...
I already have one that works well for viewing objects that are close but the maximum distance it's good for is about half a meter. I'm in the market for another inspection camera but I need one with a long focus range maybe between 30cm and 4-5 meters. Just wondered if anyone knew of such an...
Lidl selling these from thurs 20th at very good prices.
No idea about the camera but may take a punt, the multi tool cannot be refused at their price (£30 with 4 cutting blade sets for £7). Multi tool on off switch gives up after a while if used in dusty conditions but still worth the money...
Hardly used Flir Infracam for sale? About 4years old but only really been used on 1 contract once a year for about two weeks hence the reason for selling. Please find below the Manufactuers spec:
Hardly been used Flir Infracam. A great bit of kit really impressive and opens the door up to more...
Hi all, I am looking to buy a thermal imaging camera over the next week to detect hot spots on dist boards. Got about 3k to spend. Any recommendations?
what does everyone think of this?
Handheld Video Optic Inspection Tool with LCD Display : Inspection Cameras : Maplin Electronics
It says it only has 88cm of lead from the camera lens to the screen, but would this be enough?
I'm thinking of buying an inspection camera, mainly to look under chipboard floors to check for pipes & cables before cutting & lifting. I've searched on here and found two threads. I've googled inspection cameras and there are cheap ones and expensive ones, ones with rechargable batteries, hi...
No PIR suggestions please.
I have been asked to install a system which will detect intruders and switch the garden lighting on.
The garden is approx; 50m by 200m. Must work in night mode.
I am thinking camera detection as PIR's and other options are either to short in range and can give many...
ianbrookes
Thread
area
cameracameras
cover
detection
external
garden
lighting
switch
Sold sold sold sold sold
Hi there,
Selling my 4th Gen (new ipad) to raise funds for a diving trip. I bought this ipad in early December 2012. It's always been in a case since I've bought it and it doesn't have 1 scratch on it.
These are still £400 brand new in the shops. I've also got...
I have been asked to fit a cctv system in a house can anyone recommend a good system that isn't a fortune and how much is the going rate for installing one of these in a bungalow as its been a while since iv done one?
In this months Professional Electrician mag the caught on camera section has a pic of a blown up plug (bottom right) and a comment on loads of stuff running from it and being overloaded. Am I missing something, because surely if it was overloaded the 13amp fuse would blow?
Hi all I've just signed up with xs training to do my nvq and am looking forward to getting back on site and off my mitenance job in new year, has anybody got any tips.
hi!
I was thinking to get myself one of these:
Ring USB Borescope 11.5mm Camera - Inspection Tool RBS50 | eBay
do you have some experiences with that? good value for £40 or waste of time?
been to a job where diy client was reinforcing his squeaky staircase with some screws, looks like he hit...
a few I have taken;
in a living room cupboard with no door and young children
in a living room behind a curtain for electric gates - no cover etc..
socket is off !
standard downlight functionality when not properly fitted
For car fund and slimming down due to not being on the tools much :D
Makita 24v drill model number and pics to follow £85 delivered to mainland address (Sold Tel)
tek 1320 brand new tester £34 delivered same as CLICK HERE
dewalt 12v drill and charger £25 delivered pics to follow
ck magna...
Phil
Thread
attach
camera
delivered
follow
for sale
makita
sale
tools
Hi Guys,
Over the last two or three months, we've received hundreds of enquiries from tradesmen and women who are considering using a thermal camera to benefit their line of work.
As some of you may know, section 4.9 in the back of the IET Guidance Note 3 publication highlights the benefits of...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc