Hi,
Can any of you advise me, I've been told that to do work on the 12v circuits in a caravan a person must be qualified, if youre not, youre breaking the law. I am an electrican by trade (not currently working as a sparky), but I'm not well up on the regs. I find it very hard to believe that...
Hi folks, there’s a thread running on a caravan forum I’m on so I thought I’d ask on here where the experts live!
Caravan EHU supplies vary between 6A, 10A and 16A. So one of the chaps who regularly goes abroad where there are 6A supplies gets ticked off with the wife tripping the bollard -...
This may be a daft question, but I have been asked to install an outside socket on a static caravan.
As is the norm on a holiday park, the supply is via a 16A 30mA RCBO installed with a meter in a weatherproof enclosure and feeds the van via 2.5mm flex on a 16A 3 pin plug.
Usually the norm would...
Hi, have a distribution unit which feeds some caravan boxes TT system, it has upfront 300mA RCD and double pole 60898, now I’ve been sent to re gland as the disconnect times wasn’t met, but I’m getting readings of 0.30 ohms when max is either TT 167 ohms or if you go by MCB then 0.59? But the...
I am pricing a job to wire 21 new pitches for a caravan park. There will be a meter box beside each caravan with a 16a trip. I will split it into the 3 phases, so 7 caravans per phase.
Im just trying to figure out how to calculate the cable size. Is it better to run a ring main to pick up 7...
Hi there im after some advice, I’m thinking of creating a 5 pitch touring caravan site 32 amps per pitch can use a standard 100 amp supply single phase from my dno.
I need to tell my contact at western Power Distribution how big a supply I need.
Can anyone help.
trying to find answers in the reg book, but is there anything to say you can't install say a larger ring circuit for a sub main? to reduce volt drop / cable size etc.
Normally you would obviously install a large enough cable, but would this be acceptable , whats our thoughts?
Is TNS permitted on caravan site? I always thought you could use as TNS as supply cable then TT each pitch, spark I’m working with says you can use TNS all way through if ZS is acceptable
Thanks
Retired Experienced & Qualified Electrician
Boat and caravan electrical systems
Wiring, installation, maintenance, modernization, radio communication,led lighting
Cooling and machinery electricity
Solar and wind electricity
Battery groups, charging system and equipments
WhatsApp ...
What documentation is required after wiring up a single phase installation in a caravan?
All mains testing has been done as if it were a domestic installation and tests out nicely.. I can do a domestic installation cert although the parts specifying the supply I feel are a bit superfluous as...
Was having a look around local caravan dealers today, and as I know lots of you want to know the correct way to run a supply to a static caravan, I thought you might be interested in the attached photo which shows how a professional would do it! Also you also don't need the installation on a...
I am putting together some 32A 1phase connections for plugging in a caravan to the house power. I was planning on using SY flex or SWA, from consumer panel to a 32a socket, would that socket need a rotary isolator? I'm thinking yes, it will be on a dedicated MCB, and next to the consumer unit...
Just been to look at a single static caravan on a farm, they are looking for a EICR to be done.
Incoming supply is TNCS.
80amp DP protected 10mm 2core SWA running 100 meters or more to a outdoor box under caravan containing a 100ma rcd and 16amp mcb, where it has been TTd fine. From this runs...
We bought a decent condition touring caravan last year that had been recently serviced by a dealer and with a report basically saying among other things the electric were testing ok and safe.
We used the caravan quite a bit last year and the quality of the various pitches would best be...
hi all i was just in the middle of doing an eicr on a caravan park and wanted some opinions on what codes are relevant to the site.
ive got tncs pme 100a 3 phase. each phase feeds a db like in the picture by a 100a main switch and 63 amp mcb and 10mm pyro (earthed with bonding clamp) which in...
Greetings,
Ive been asked to look into a supply for a caravan site.
I would like to know if i could get the local (northern power grid) to install this for free. If not what would the most be around for a 3 phase supply.
The local supply (house) is around 150 Mts away.
He would like to have...
Hi any experts out there that have fitted solar panels to a static caravan connected to site supply via 3 pin 230 volt.Straight forward or complicated.
Hi,
My inlaws have a new garden hut arriving in three weeks to the bottom of their garden which is around 103m from the house. It has various electrical appliances including a 8.4kw electric shower (!). The company making them do an EIC measured on their supply before transporting it to us. The...
Hi there,
Looking for some advice with a new caravan park. There will be 25 plots for static with a potential 15 being added in the future. SP Energy have quoted to supply 150KVA 3phase. Now I work that out to be 216A but will that be per phase. And also does anyone know where I might find...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc