Can anyone recommend a good central heating course ideally covering s and y plan, underfloor heating systems and maybe ground source???
By the way, has anyone done the NIC PV course? The lad I work for has just done it and said it was a total waste of time and money with roofers and kitchen...
Can anyone recommend a good central heating course ideally covering s and y plan, underfloor heating systems and maybe ground source???
By the way, has anyone done the NIC PV course? The lad I work for has just done it and said it was a total waste of time and money with roofers and kitchen...
Hi,
Does the wiring runs and wiring up of central heating controls come under BS7671. Would a cert be required for this type of work.
Thanks in advance
Hi im new to this board so sorry if this is in the wrong place. Currently there is work going on in my house and the boiler is moving from one room to another along with time clock and thermostat. Now there was a 3 core from time clock and a 3 core from stat going to boiler spur with 5 core flex...
hi guys
In two minds about underfloor heating, am wondering what the advantages and disadvantes are with these types of heating. I´ve installed a few electric underfloor heating systems but only on a small scale. Never come across the water pipe underfloor heating, what do you guys think is...
Hi all
Just wondering what kind of rates you guys would expect if doing price work on installing central hearing systems. Bonding has to be upgraded if not there and all main earths 16mm regardless of supply due to the contract. Combi, y and s plan prices please. Also please add for the need...
Been called to a job where the client tried to change a central heating programmer.
He took the wires out the backplate and forgot to note down where they went! Monkey!
So I have the brown and blue from spur which go to L and N of the back plate but then I also have a brown and blue from...
common sense tells me that over time a hot central heating pipe over my capping for socket is bad news,an is there a minimum distance a socket should be from radiator?i av put my points were builder asked then plumber has come along an done this ready to be plastered over.way i see it 1st in...
Does anyone know if any companies do wireless control of the valves in a Y plan system?
I have looked at the Honeywell solution using ST9420C as the controller but this is WIRED. The room stats (DT92E) are wireless to the controller though which is a start.
What I ideally want is a system...
This is my first attempt at wiring underfloor heating and i need URGENT advice if possible.
The attached diagram is how wired. 2 zone valves, first for central heating with its own stat, second for UFH with three actuators. Actuator 1 is for bathroom with one stat and actuators 2 and 3 are...
Seen this somewhere before.
Guy calls me to say in the last 3 weeks his street has had a few power cuts. Since then his central heating system which controls both the boiler and the hot water has had the following problem.
He can turn both heating and hot water on separately. But when he...
Hi guys, I am currently on level 3 2330 at night school, and have decided I want to move my stat for my central heating as it is upstairs and I want it downstairs. My question is: the stat is wired in 3core and earth not sure whether 1 or 1.5mm - if I want to extend the cable do I need 1 or...
anyone recommend me a good simple book, or a book with a chapter or two, or even online resource that goes into how different central heating systems work and how to diagnose faults. The 2330 never mentioned them :(
Cheers
I was thinking of purchasing one of these 5ltr bottles of central heating cleaner but how on earth do I put it in the system without making a mess?
Sentinal X400...
Hi,
Need some advice,
I've got a Vaillant combi boiler with a programmable timer (Danfoss) and a seperate stat in the hallway (Danfoss).
The radiators all get hot to whatever temperature the boiler is set at - even when the programmable timer is off and the stat set to zero... I'm sure...
its a gravity pumped system. i have a seimens rwb2e timer and iv mixed the wires. from the fcu there are two twe wires on the load side. on the timer there is L N 1 2 3 4 SO ON CABLE ONE THE LINE WIRE GOES TO L BUT THE BLACK WIRE ON THAT CABLE DONT GO TO THE NEUTRAL IT GOES TO NUMBER 2 R 3...
Ok ,
I've got underfloor heating with 4 zones, one programmable timer, gas boiler Vailliant Ecotech, Megaflow cylinder in loft, 4 (I think) thermostats and a pump. Which central heating plan is this please?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc