Hi All, me again.
I quoted a small job in a landlords house. The CU is located in a cupboard under the staircase and has rammed with the tenants rubbish. I asked the landlord what type of CU was in there and he told me it was replaced 2 years ago for an RCD board. I moved abit of stuff and...
Hi all, using NICEIC online certification for replacement cu. the cu is duel rcd I have an rcd in circuit 5 and 6 also 9 and 10. My question is how should I create the board and circuit details?
Lyndon
A colleague has been asked to undertake 5 yearly periodic inspections and certify. He has passed the 2394 and 2395 practical and online elements however awaiting writen exam results.
Company are hoping to put him out there. I have reservations. Not that I don't think he's capable more so that...
I'm installing a few extra lights to an existing lighting circuit in an office.
The existing lighting circuit is supplied from a BMS Control Panel, which has a number of lighting output sockets wired up to a contactor.
I'm going to be connecting the new lights up to one of the spare sockets on...
Hi,
I have been in discussion with a friend Regards minor works certs for a couple of jobs he did recently.
1. Move light (cable is not extended just moved 300mm using slack in loft)
2. Change single socket to a double socket.
He has insisted he is not altering the circuit and that it is...
Hi all,
asked by a friend to go and look at a shop for them and give a cert as requested buy the estate agents,
ive gone and had a quick look, two wylex dis baords, no RCD .
told me mate the boards could to with changing for new and coded this c3, then i (wrongly i assume) put unsatisfactory...
Hello,
I have just had a new builder with his own Electrician come in to do the following:
Kitchen:
- Install an electric oven. There was a switch / cable in the kitchen already for it to be connected to done by the previous builder's Electrician.
- Install an electric extractor hood in...
Does anyone here use E Cert? This is the free cert software you get with Stroma membership, it is an okay bit of software but I keep having re inputting postcodes and other info into the cert, need to know if it is just crap software or I am doing something wrong?
I have been through a time served electrical apprenticeship, achieved LV 3 2330, AM2, NVQ, and all other stuff to do with, 6 years ago. I do not not have test and inspect. I have always worked for large contracting companies, in the cushy side (maintenance) and have never had to supply certs for...
E.on have just discovered that a job we registered back in December 2011 had the wrong meter serial number on the certificate.
Are we allowed to update the certificate to show the correct number?
Tia.
Hi, Im a registered Kitchen fitter for a well known and respected company and therefore all trades I use also have to have all relevant papers (gas safe, part p etc)
I started a kitchen and arranged for my spaks to turn up at the point I needed him, all he needed to do is plug in the appliances...
Just moved over to the online Certs and filling in the DB schedules for the boards but can't get just the few ways that I need, ie 10L/123, 11/L1. Is it possible to do this or do I need to fill out not worked on/tested for the rest of the ways in the DB to get to where I want?
Im new to inspection and testing. Sorry if i sound lost. Basicly came to a job an electrician has done. Hes installed sockets in the bedroom and sockets in the new extention coming of the same circuit Would i note this on 1 minor works as bedroom/extention sockets and use the highest zs from...
Afternoon
Looked at a local little job for me today- 2mins from my house
basically guys had a upper extension done (just a single bedroom)
hes done the electrical work himself (on my quick site visit today- on 1st impressions- it looks like hes taken pride in his work and it is to a good...
Folks,
Not one I've come across as I'd always completed and approved my own installation certificates but....is it OK for a sparkie to PP the inspector's signature on a certificate?
Doesn't seem right to me.
Thanks
Leeds Solar have just become aware that on 10th March DECC slipped in a Statutory Instrument that takes effect today (31st March 2016) that results in the following urgent issue.
All existing renewable energy installations with an MCS certificate issued before 15th January 2016 must submit...
Hi, I have just received (emailed) a minor works certificate with the word "working" across it, Its a Napit Cert and the work was only minor, just wondered about the word "working" is this normal as previous certs had nothing across them.
Thank you
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc