change | Page 2

change

  1. T

    Adding a light to loop at switch and change to 2 gang switch

    Hi, I am wanting to add a couple of wall lights to a room that currently has a single ceiling rose. Attached are photos of the one gang switch and the ceiling rose. I wish to change the one gang switch for a two gang switch, so that one switch operates the current ceiling rose while the other...
  2. S

    Sufficient cable to change outlet

    Is there enough cable in a 3 pin socket box to change the socket to a freestanding cooker outlet. The cable is on it's own 32 amp circuit and is adequate for a freestanding cooker. I was originally going to have a gas hob and electric oven. I would post a photo, but the thread doesn't allow. Too...
  3. J

    voltage experiment - Will it remain the same or change?

    If we have a single 100V Live coming in from the AC Transformer, at any point we measure its 100V If however we introduce loops, does this have any effect on voltage? What would be the voltage reading at the following points on the image Purple Pink Green Im wondering does it have any...
  4. sythai

    TP Change over switch

    Hi Guys Just doing new house and Client wants us to put in a change over switch in case ever needs to run off genny. Not put one in before but looks straight forward enough. Was going put commando socket next to the meter box for hook up point along with earth stake (current supply coming in...
  5. C

    Can an electrician change the Economy 7 timer in a smart meter?

    Hello, I am on Economy 7 and I have storage heaters and a hot water tank connected to a separate CU for my off-peak usage. The timer that switches to the off-peak circuit at night on my newly installed SMETS2 smart meter is wrong so I am being overcharged by 50% for my night appliances. The...
  6. L

    EIC for change of swtich after a EICR

    HI Guys and Girls, Sorry been out the game for a while so a bit behind on the regs etc and changes with rental properties on a rental property i own, we had a EICR had 1x c2 (burn damage on a 20a switch) which was replaced the letting agency is requesting a EIC for the updated work of...
  7. S

    MWC for changing socket or light

    If changing a socket front front or light is a minor works required and would you test the circuit
  8. S

    Career change at 39 - am I wasting my time

    Hi All, I am looking to retrain at the age of 39. What are the chances of an employer taking me on and giving me a chance? I do have my electrical installation qualifications NVQ levels 2 and 3. All I need is the practical training that will lead me to my AM2. Does anyone know of any...
  9. NellyManjaro

    Hard wired smokes with CU change?

    Hopefully an easy one without much debate but I've just had spoke to someone who has had an electrician go to his rental property and say it needs a new CU which I'd agree, all sockets to be replaced as they don't have switches which I would personally but didn't think this was actually a...
  10. G

    UK Is my UK bought pool pump configuration safe? Should I change it?

    Hi, I hope that someone here might be able to put my mind at rest. I have an engineering mind and a reasonable understanding of electical work, but I'm not confident on this area and want to ensure the safety of my family. I purchased a bestway splasher pool a few years ago (holds around...
  11. M

    Type A rcd in series or change at the board

    I am to install a car charger that states a type A RVD is to be installed. Can this be put in the garage from the non rcd side of the board or is it better to change the RCD on the board and use that side. I assume it makes no difference
  12. Binda69

    Consumer Change - Should I be Concerned?

    Greetings all, just had a consumer unit upgraded and wanted your opinion before I have words with the electrician. Some stuff is obvious like the gland strip not fitted properly, you can’t just about make it ou, but others not sure off ie should the the meter tails have been fed separately from...
  13. groston

    Can I change this switch?

    I recently had reason to look at the switch in my garage that controls the outdoor garage lights. This picture shows how the switch is wired and I haven't the foggiest idea of why a neutral wire runs to the switch. Note that this wiring was done by the house's builder about 20 years ago. (Note...
  14. A

    Career change at 39 - am I being realistic?

    Hi everyone, I'm new to... everything around here. I am 39, working as an engineer in big tech, and I hate it. I have got really into DIY over the past couple of years, mostly carpentry, plumbing, bit of demolition :)s) etc. I have a healthy respect for electrics, so I've not touched them so...
  15. Aaz-UK

    Career change pending

    Hello one and all, and thank you for accepting my registration to your forum. I am a family man 34 years of age and am in the process of looking at a complete career change whilst I still can practically afford it. My wife and I have discussed this in depth and I am at a point whereby I can...
  16. bigspark17

    Pay as you go meter change

    A customer has a pay as you go ec7 meter, the need for ec7 is no longer but they want to keep the pay as you go (wont be talked onto a DD) am i right in thinking they dont need to change the meter just inform there energy supplier that they want to go on standard tariff? Thanks :)
  17. P

    Bought 32A EV Charger, need to Change CEE plug to a USA Range plug.

    Hi, I Bought a 32A EV Charger, it comes with a CEE wall plug. I need to use it with a 60A range recepticle which I use to plug in my welder. So obviously I need to change the CEE plug into a Range plug. There is no paperwork, no schematic. As the CEE has 3 wires Red, Black and Yellow/green...
  18. T

    Cu change in a flat earth size

    In my flat the main earth is the cable pictured below it has 7 strands any idea what size this is? And if it would need to be upgraded for a cu change The bonding is in 6mm but is easy to change to 10mm but I guess that's irelavent if the earth is 6mm? The conduit system the 16mm tails come...
  19. W

    UK Different test results after DB change

    Is it common to get different test results when upgrading a db? Basically I done an EICR in November and came back to upgrade the db and done live tests on all the circuits, but my results were quite different. Like 0.30 ohms out on one circuit
  20. M

    can I change a dimension of a fuse

    I could find the fuse on the top right of the image which measures less than 1.7 inches in length from end to end and has 150 amps. (grey color). The fuse is inside a SAM module in a Mercedes. None of the auto part stores have it and the dealer do not carry more than 100 amps. They want to sell...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top