combined | Page 2

combined

  1. DC-backfrom the past

    single fused spur and single socket combined unit do they exist?

    like unicorns, I have seen pictures of these, but cant seem to find a distributor. can anyone assist ? at present there is a double socket in place with limited space around it so looking for a combined unit. I know I can change the back box and put two single units in its place, but saw a few...
  2. P

    Fused Spur Combined Socket

    Morning Looking for the above, does anyone know of a supplier please?
  3. Lou

    Craddock Electrical Services Ltd

    Craddock Electrical Services Ltd is a family-run team of electrical contractors based in the heart of Bedford. We are registered with the National Inspection Council for Electrical Installation Contracting (NICEIC), for added reassurance. As members of the Electrical Contractors Association...
  4. P

    Red arrow led emergency combined disco fitting

    Hi all thoughts please I am using the said fittings in a commercial building using 3 core in and out at each fitting at the key switch I am using a 1gang 2 way key switch the idea being the key switch on will make the brown live this enables when requiring 3 hour emergency light test to switch...
  5. A

    combined smoke and CO2 detector

    combined smoke and CO2 detector a customer wants these fitted throughout her house but I'm having trouble actually finding them they have to be mains powered I've tried aico and kidde but no joy anyone ever fitted these before?
  6. N

    2394/5 combined

    Hi all. I want to get 2394/5 combined course done. Been looking at a training provider called Eversafe based in Wickford Essex, has anyone used these before and have any opinions on them. Thanks.
  7. L

    JTL combined inital verfification and periodic course.

    JTL run this course. Some one please enlighten me, if my work colleague did this course (im already 2391) would he achieve a City and Guilds qualification? Initial Verification and Periodic Inspection, Testing and Certification of Electrical Installations Level 3 (EAL Accredited)Combined: 6...
  8. A

    2394+2395 combined course

    I've enrolled on the above city&guilds course which I'm doing 2 evenings per week for several weeks. I have little prior testing experience only really cont tests and IR tests. I'm looking for practical advice from anyone who has done the above courses before, (not neseceraly combined) hints and...
  9. S

    finding centre to do 2394/95 combined

    im just enquiring to see if anyone has taken the combined course in Nottingham or the surrounding areas, I have asked a few places and the general price is around £800+vat, has anyone got it any cheaper anywhere else.
  10. J

    Help...2394 & 2395 UNDER Subscribed.

    Just got told by Bracknell & Wokingham college that the combined 2394 & 2395 that I enrolled on is under subscribed so more than like likely not going ahead. Am proper gutted. Apparently I'm the only one! They need at least 6 more! I know its a long shot but if anyone else( 6 of you) fancy it...
  11. Worcester

    Combined PV / Thermal Panels

    We've got a job to do where the client wants both PV and Thermal so we're looking either for a combined panel or matching ones I know that Viridian do a matching pair, anyone had experience of either matching units or combined units and if so what is the performance and performance / cost ratio...
  12. R

    Combined Main Earth & Gas Bonding

    After some advice please... I visited a property today to cost up a job. I spotted that the Main earth (16mm) had been bared back on its way to the board and clamped to the gas pipe. (Doubling up as a bonding conductor). The cable was continuous and was not cut or joined. Any installations I...
  13. S

    PV panels combined with thermal

    PV panels do lose a lot of efficiency as they heat up (they get extremely hot due their dark surface in direct sunshine). I believe there are some combined PV/thermal panels being developed so that the heat can be conducted away with the double benefit of better pv performance and hot water. I...
  14. D

    Booked 2394&2395 combined course for october

    Hi just trying to be as ready as i can be, i have read guidance notes 3 a few time over an will continue to do so until i do the exams, but what else can i do to prepare. Are 2391 past papers the way to go? if so shall i buy them online? oh an i have very little testing experience done the 2392...
  15. HappyHippyDad

    Low IR readings on lighting circuit - 0.654 Mohms

    I have spent quite a bit of time today trying to understand why I am only getting 0.654Mohms on the upstairs lighting between Live and neutral (at 250V)!!! L-N 0.654 Mohms N-E 25.11 Mohms L-E 24.7 Mohms I get almost the same when measured at 500V (cant remember exactly but about 0.6Mohms) I...
  16. D

    Voltage detector... with or without combined clamp meter?

    Stupidly dropped my voltage tester on the floor the other day, straight on to a tip which broke clean off... Been checking out online for a replacement, the basic ones (like I had before) all seem pretty similar regardless of the brand. About £30 for Fluke, Martindale, DiLog etc. Spotted a...
  17. R

    combined earth + neutral cutout

    hi everyone, hope you can help. im currently installing a small submain to supply a DB which is then supplying a cctv power supply. there is a new lucy 25amp cutout in an external cabinet which has recently been installed prior to my work being carried out, when i have carried out work which...
  18. J

    Off peak and domestic combined

    Hi guys, any suggestions as to why a domestic and off peak supplies can't be put into the same split load board?
  19. Y

    Emergency Light Switch

    Hi all, Just a quick one, Connecting up a 2gang Key Switch for combined emergency lights as shown in my (Very Basic) picture. But should we be 'linking' the Neutral accross from the 'EM' load side, to feed the 'SW' as well as the live or is there no need. Sorry if my drawing is a bit simple...
  20. M

    Combined L&N IR test on all RCBO board

    Hi Carrying out a whole board insulation resistance test , very large house and LOTS of vulnerable equipment so wish to do a L&N combined [ link busbar to neutral bar] on whole board. Each circuit is on a RCBO , how would i test this, do the neutral and earth fly leads of each RCBO need to be...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top