connect

  1. Midwest

    Ford Connect Double Locking Fault

    My Ford Connect double locking has stopped working (intermittent fault). Manual says it won't double lock if one of the doors is open. Well I've shut all the doors properly, but I guess one of the door switches is telling the system I haven't. I know the side door has got one of those three...
  2. M

    Siemens install fuses

    Hi All project nearing completion block flats, installed Main switch tails for connection only small 200Amp 3 phase. all ready Ryefield installed meter boards all ready. head on up to trunking. tails installed 95mm TRI /BI rated Siemens arrive on site ah can't connect those tails anymore...
    • marc8
    • Thread
    • connect fuse fuses install installed ready siemens tails
    • Replies: 2
    • Forum: UK Electrical Forum
  3. C

    Extent of testing

    200 A 3phase cutout bs88 fuses... manweb said they wouldnt connect the installed 95mm tails for the installed 100ma rcd for temporary site ofiices etc this supplies a large 3 phase board that currently supplies a smaller 3 phase board from 100 amp 3 phase mcb... If i installed the last 3 phase...
  4. uksparks

    WANTED: 2014 Ford Transit Connect Trend 1.6 TDCI LWB

    Hi, I am looking for a LWB 2014 Ford Transit Connect Trend 1.6 TDCI If you happen to have one or know anyone, I have got £11k~ to spend, cash waiting. Any colour considered, preferably less than 35k Miles. it should look like the picture.
  5. Peter Monfort

    Ring final circuit question

    When you do the continuity test on a ring final circuit and you have to connect L1 to N2 and vice versa, this assumes you know which L cable is the incoming or outgoing. I understand that if you connect L1 to N1 and vice versa the ohm readings rise then fall as you go round the ring circuit...
  6. L

    showerlite showerfan

    Good morning have just brought a basic showerlite showerfan from B&Q and I want to fit it in a down stairs shower and I want to know if it can be wired straight to the light switch which is a pull cord.
    • LR8289
    • Thread
    • connect connected neutral shower switch
    • Replies: 3
    • Forum: DIY Electrical Advice
  7. Midwest

    Shower & Steam Cubicle

    I was asked by a plumber colleague, to have a look at a shower/steam cubicle, someone had asked him to install. The client had purchased the thing off ebay about a year ago, and has just been in a position to have it installed. The thing has come with no manufacturers instructions, and the...
  8. F

    LED Tape & motion sensors

    Hi. I would really really appreciate help on this as I need advice please. I am going to fit LED tape inside my sliding wardrobe doors so they come on from the 2 motion sensors when doors open. I have bought 2 of the below motion sensors to be fit at each end of the wardrobe: Mini PIR Infra...
    • fultunni
    • Thread
    • connect led led tape motion sensor sensors tape transformer
    • Replies: 7
    • Forum: DIY Electrical Advice
  9. A

    Wiring for Foot Switch

    Hi Guys, Just joined the Forum to get some help, but also to widen my general knowledge on electrical matters that come up from time to time. My main hobby is woodwork and within that, operating a scroll saw, or fretsaw as they were called many years ago. I was advised to buy a foot switch to...
  10. N

    basic question on MEGGER 1710 MFT.

    Morning, I’ve only ever used a kewtech MFT and I’ve bought a Megger 1710 On the back of the tester above I have the following colour coded terminals for the test leads. L3 Blue L2- Green L1+ Red Q1. What leads should I plug in to do the end to end tests on a ring final circuit. Doing...
  11. uksparks

    2014 Transit Connect

    Hi, im looking at splashing out in a new van... has as anyone got a 2014 Transit Connect? They look nice. what else is there that's better for say £12k? mudt be a small van like a connect as need it to go in the garage nicely.
  12. J

    Measuring Zs with RCBO

    Hi everyone, I've read that when carrying out earth fault loop impedance test we have to disconnect the functional earth of the RCBO (in case there's one) from the earth bar to avoid misleading result. Is that correct and is there anything else we have to disconnect? I know about carrying out...
  13. A

    Solarmax

    Hi all, as you may be aware Solarmax parent company went into liquidation and all warranties and help sank with Sputnik. Well, as luck would have it I have 250kW which is going into device fault. Anybody know anybody who may have an idea about repairing these or do I need to refit with...
  14. R

    Facebook Connect

    Hi guys, I previously created an account via my Facebook connect but the button does not seem to be working. I've now created an account with my e-mail address as the old e-mail address with Facebook Connect it would not let me change my password saying the one the forums e-mailed over before I...
    • Ryan Jones
    • Thread
    • address book connect facebook password thread
    • Replies: 1
    • Forum: UK Electrical Forum
  15. S

    l.5mm t/e connect to 6mm t/e oven ccu

    i am busy replacing my old oven and hob, at present there is a ccu supplied by 6mm t/e. my new cooker and hob have both come suppliesd with 1.5mm t/e flex. is it ok to connect both cables from oven and hob to the ccu? the circuit is protected by 32a mcb an rcd, thanks SO1
  16. T

    No cpc on lighting circuits

    Advice please installing a in line bathroom fan in a house ,their was no cpc on the lighting circuits ,I told owner I could install fan but couldn't connect to power due to no cpc advice?
    • tesla09
    • Thread
    • advice circuit circuits connect cpc install lighting
    • Replies: 16
    • Forum: UK Electrical Forum
  17. M

    trying to connect a positive input ventilation unit Help Required

    I have a PIV unit which comes with a power cable connected with 2 wires N and L. is it possible to connect the cable to a plug with a 1 Amp fuse or would this blow the unit. The electrical details of the unit are;- Voltage : 240v Iph 50Hz Consumption : 1.6W (min) 15.3W (max) Fuse size : 1 Amp...
    • monkey2014
    • Thread
    • connect input positive required trying unit
    • Replies: 1
    • Forum: The Welcome Forum
  18. P

    New board connected to V I R cables

    Hi whats the situation on following! went to wire a bathroom today in old terraced property all looked good new board (last 6 months) full niceic member! certificates not to hand YET! looked in loft to find V I R cables! works out from board new cables run 2 mtrs into joint boxes picking up old...
    • powervan
    • Thread
    • board cables connect connected customer new new board problem
    • Replies: 56
    • Forum: UK Electrical Forum
  19. B

    Loop in at The Switch - 3 Gang 2 Way

    Hey, I've just past my trade test and was placed on a new build to complete the 2nd fix as the guy who roughed it has left. Anyway, he's wired the lights using the loop method at the switches, I've never did this previously as I would always do the joint at the ceiling rose, this has thrown me...
    • bjd91
    • Thread
    • 2 way connect continuity loop switch wired
    • Replies: 34
    • Forum: UK Electrical Forum
  20. B

    Robin RCD tester

    Hi I have a robin KMP5406DL RCD tester which has a pulg lead to test socket circuits. How would I test a radial circuit on a RCBO with this tester. Could I use the 3 leads cable supplied with the KMP4120 loop tester on the RCD tester? If so where should I test CU or end of circuit and how...
    • besenzig
    • Thread
    • circuit connect leads rcd robin tester
    • Replies: 5
    • Forum: UK Electrical Forum
Best EV Chargers 2025
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top