consumer unit | Page 6

consumer unit

Recent contents View information Top users
  1. J

    Old CLICK Consumer unit.

    Morning everyone, I have a customer with an old CLICK consumer unit, the MCBs are DB132, DB106, DB116 etc. Does anyone know if the new CLICK elucian range of RCBOs fit this board? I have a picture of the consumer unit (Looks like a bomb has went off) if needed. Appreciate any answers. Kind regards.
  2. MattBUk

    Electrician says I need a new consumer unit to pass inspection - do I really?

    He says 'it's fairly important to change the consumer unit as it wont pass the Inspection in its current state.' He's coming round tomorrow to replace it, has he given me duff advice? Cheers, Matt
  3. sythai

    Router close to consumer unit

    Hi Guys Just setting out final positions for new house we have coming up. Client would like router in same cupboard as DB, not my first choice really. If DB is at 1450 from floor level then say we put router/ rack at high level 2300 with a shelf dividing do you reckon this would be ok ? Other...
  4. P

    sub main to consumer unit on new builds

    Hi. I have a small new build sit to price up. The consumer units are to be sited in the middle of the house behind the front door. After best way to supply from external meter box. I was thinking of using split concentric from kmf with a metal plate over it on internal walls. surface mounting or...
  5. R

    UK Fault with ring main

    I was testing a consumer unit before upgrading to current standards. (Old re wireable fuses) when testing one of the ring mains continuity i found 38v on the cpc with that circuit disconnected. After carrying out end to end tests on Line and neutral which came back fine. I found the voltage...
  6. A

    Help please on a sub consumer unit fed from RCBO

    Long time lurker so this may be my first question. I am a qualified electrical engineer, but in aeronautics not domestic installations, and I may therefore ask silly questions. We have purchased a property that is unfinished, and where the electrician went bust before the installation was...
  7. Dave OCD JNR

    Small consumer unit in outbuilding.

    Here’s a little board I installed the other day in an outbuilding. Trying to follow fathers footsteps. 😁þ
  8. N

    Danson Consumer Unit

    When carrying out an EICR I found this board. The live bus bar cuts across the neutral where the tails have exposed copper. Is this the way these boards come? I have never came across this before Cheers
  9. S

    Consumer unit for shipping container

    Hi Folks I've been asked to quote for a consumer unit, supply cable and some internal wiring in a shipping container on a private caravan plot (single family residential). The container will be used as a shower block. The mains supply will come from a meterbox installed on a post on the plot...
  10. timhoward

    Can't find a consumer unit....!

    This is getting embarrassing - I've been looking for a sub-main consumer unit in a church for an hour now. I've found the incomer. There's a nice old Crabtree board with black breakers, one of which is a 50A for "Hall DB". It's a split level site and the hall is downstairs, and the fat 10mm T+E...
  11. H

    Consumer unit too close to gas meter

    Good evening Have to quote on a consumer unit replacement, problem is gas meter is next to existing consumer unit 25 mm between them, they are both in a wooden cupboard, What would you do
  12. Michael J

    NAPIT Certification Scheme Consumer unit replacement issues

    When carrying out EIC on a new consumer unit installation and found a existing ring circuit with a Neutral to Earth fault causing the rcd to trip. The old fuse box didn’t have rcd protection as it wasn’t required. The problem is after removing all connected and appliances loads the fault is...
  13. B

    weather proof consumer unit

    hi all, Hope everyone are well and keeping busy. I am quoting for an ev charging point installation, the only way I can supply it, is to split the tails in the meter cupboard, and install a weatherproof consumer unit External to the meter cupboard, as I know the dno do not permit you too...
  14. S

    UK Consumer unit TT system far from DNO fuse

    Evening all, I’d appreciate your opinions here: I’m looking at an old (150 years+) stone house. Complete rewire and renovation. DNO fuse is currently where the master bedroom will be (upstairs). Client wants it to be moved to a more accessible location downstairs about 15m away depending on the...
  15. S

    Consumer unit under stairs

    Hi, Just after your thoughts on the following- I am running a 25mm armoured from a KLM switch fuse to a consumer unit under the stairs in a domestic property. I intend to gland into a joint box and take 6181Y meter tails to the consumer unit. Under the 18th a edition the consumer unit needs to...
  16. S

    What type of consumer unit is this?

    Hi I have seen a few of these they fit flush inside a electrical cupboard I’ve seen Wylex and Crabtree . I’m changing this db but can’t find the name for these style of boards
  17. D

    The new build consumer unit of the future and beyond...

    3 phase , surge , afdd , rcd , dab radio , built in espresso machine
  18. C

    Does reinstallation of busbar need professional sign off?

    I'm buying a house and have received the electrical testing certificate. There were two C1's and a C2 identified, all very easy fixes even for an amateur DIYer, the problem I have is that the electrics were condemned for this reason and so the busbar was removed from the consumer unit. This also...
  19. M

    How to upgrade really old Service Head, Meter and Consumer Unit

    Hi, I am looking to get an electrician to upgrade my consumer unit and do some work on circuits. At the same time, have been receiving letters from E-On about upgrading to smart meters - this was supposed to happen a few years ago but when they visited, they refused to carry out any work...
  20. Z

    Installing Outdoor Lighting - help please!

    Hi All, New to the forum, looking for some advice. I'm a fairly competent DIYer and have completed some other minor electrical stuff recently... I'm looking to install some outdoor lights in my new house as currently have none. There is no existing lighting circuit outside or sockets, however...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top