Hello,
I am an expat living in Estonia.
My wife bought this picture light box from a second hand shop. It seems hand made when I took it apart. Looking at the cable and how thin the wiring is, is this okay plugged in to 230v? It seems a very thin cable to me to be carrying 230v.
I’m replacing an old 100mm extractor fan in the kitchen with a new one. The old one was a pull cord fan whereas I bought a timer one (no pull cord) thinking I could use the isolator switch (which is directly below the fan) as the on/off switch.
The cabling is a 3 core and on the new fan there’s...
I have a small power washer with a two-wire cord and GFCI plug. My outdoor and garage receptacles are on a "house GFCI" circuit, wired in series to one GFCI receptacle. I tried to use the power washer and the plug GFCI would instantly trip when plugged-in and instantly re-trip when reset. I have...
So I kinda want this:
meross Smart Power Strip, 6 AC Outlets + 4 USB Ports Smart Extension Lead, Compatible with Apple HomeKit, SmartThings, Amazon Alexa, Google Home, Voice/Remote Control, 2.4GHz, 3250W: Amazon.co.uk: DIY & Tools
But it's only a 2m device . I'd want it to be 4m instead because...
Hi, would would be your thoughts on this one?
On the floor under the sink in my kitchen is a power cord that connects the small undersink water heater to the outlet.
It's the heater's power cord connected to a simple extension cord. The coupling of the extension cord lies directly on the tiles...
Hello!
Which solution would be best when traveling abroad:
a) buy an extension cord from your country of origin, then use an adapter in the destination country to plug it and then plug your devices to the extension cord.
b) buy an extension cord from the destination country, plug it and use...
I bought an under-cabinet light fixture. It is LED, so low power (120VAC 12.5W). It came with a detachable SPT-1 power cord. One end of the cord plugs into the fixture. The other end is a NEMA 1-15P two-wire plug. Here are the installation instructions that came with it:
I heard that NEC...
Bought a range from Home Depot. They supplied a 40 amp cord. Electrician was going to use a 50 amp outlet.
Here is the oven and cord.
https://www.homedepot.com/p/GE-30-in-5-3-cu-ft-Electric-Range-with-Self-Cleaning-Convection-Oven-and-Air-Fry-in-Stainless-Steel-JB735SPSS/314138205...
DIY at my friends house, his pull cord stopped working for bathroom light, so i went over and the wires that are coming out the roof was 3 wires and thats neutral, live and earth. got a new pullcord panel, put the earth in the box terminal, neutral into com and live into L1. turned the breaker...
Hi! I am self-installing some 8' LED rope-like lighting in my basement on the ceiling. I have 3 of these 8' lights, which will be joined by 2 12" connecting cords. There is an option to wire these connected lights into the main lighting, but I don't want these to come on every time I turn on...
I'm renting a property at the moment and one of my children yanked the cord and pulled it out. Is there a simple way for a novice/DIY'er like myself to replace this cord without touching any wiring?
I did a Google search, from what I saw, this would require messing with the wiring, which I...
Hi,
I am trying to move my pull cords from the bathroom to a outside switch.
I have a pull cord that controls a light and fan together. the wiring is shown in the picture.
the 2 wires are live/sw and go into L2, the L1 (I assume is a neutral ?).
How do I take this setup and wire into a...
Hello,
I'm trying to replace the switch for the shower I'm not sure what to buy. Can I pick any pull cord switch from Screwfix?
It is a Bristan 8.5KW electric shower
Will this 45 amp be ok?
https://www.screwfix.com/p/british-general-45a-1-way-pull-cord-switch-white-with-neon/65167
Thanks in...
I have a wardrobe with no lights or mains socket in it, I would like to put an LED light strip in there and somehow connect it to a pull cord switch and for power, I’d like to use batteries, probably 4xAA in a battery case which would have a positive and negative wire coming out of the end of...
I am looking to change my Bathroom Light to motion sensor one.
It's switched on by pull cord (intending to remove pull cord part and leave on)
I wired it all up and tried it
Light stays on .. all the time (see just under the door) but if you go into bathroom and stay still light will go out but...
Hi All,
I hope you are doing well.
I keep having the issue with this pull cord switch to the power shower.
I used a number of pull cord switches 45A and 50A ones mostly from Screwfix but I think the problem is with the wiring.
As you can see on the picture the RED and BLACK twisted copper...
I want to add a 30 amp RV outlet to one end of my house.
My Breaker panel is at the other end of my house (about 75 feet away)
10/3 wire has gotten ridiculously expensive (10/3 romex is over $4/ft).
Is there any reason I shouldn't use a 10 gauge 3 wire outdoor extension cord for the run under...
I hope I'm posting to the correct spot. I have a portable generator, Westinghouse WGen7500 (running) that I plug into the side of the house with a 4 prong plug. It's got its own panel inside the house so it's all wired to code.
It used to sit by where I plug it in but that's visible on a sort...
I had an electrician a few years ago do up my house for a portable generator which my son-in-law bought me. Everything works fine over these past 3 years. The problem is the darn generator is SO big I can't move it. So the power goes out and I'm in the dark! My handy guy and I have found a spot...
I have an outdoor electrical subpanel with a nearby outlet. We've plugged an extension cord with a built-in GFCI into it , but the GFCI trips every time, with any device plugged in. When we plug the same GFCI/device into a different outlet near the house, it works fine.
We've replaced the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc